200e

On Feb 20, 2008, at 10:19 PM, jon schatz wrote:
> 1) which 10 pin connector do i use when connecting a 225e module up to
> the externally facing midi jack in a boat, the one on the circuit
> board closest to the faceplate or farthest from the faceplate?
>
It's on the back of the module towards the bottom, facing the MIDI  
jack board, when in the case.

> 2) how do i edit the time parameter of a given step on a 291e?
>
Press in on the encoder to move between fields.

> 3) i know that at least my 225e is out of date firmware-wise.
>
Buchla & Assoc. sells a set of cards, one per module, that the  
firmware is delivered on.

You will also want a couple of blank cards to back up your presets.

-C