200e

Hey y'all,

Forgive the noob question, but I'm trying to get my head around the 250e stage selection 
behavior... From what I gather below, it should be possible to advance the sequencer one 
stage per incoming clock pulse (assuming none of the adv/sust/enble/stop functions are 
selected for that stage), or no? It seems that whenever a pulse arrives at start/adv, the 
internal clock begins advancing as well...

Thanks much

John


--- In 200e@yahoogroups.com, "ezra buchla" <ezra.buchla@...> wrote:
>
> with midi, you can use the pulse outputs from the 225 note busses to
> clock the 249e, 250e, or 291e in "advance" mode. i've used this a
> lot... since each stage of each sequencer can be assigned logics w/r/t
> incoming pulses, this allows for much richer behavior than just
> syncing to a clock (which, again, we still plan to implement; the 249e
> in particular already has a bpm data structure...).
> 
> you could also use an analog pulse as a clock. any voltage with a
> (>=10v) -> (<10v) transition will work as long as the voltage source
> and the 200e share a ground.
> 
> as for midi out, we're working on it and considering different
> interface options. the strongest idea so far is to be able to
> individually assign 225 busses to input or output CV, but this
> requires some new GUI programmming. the wiring is all there already.
> 
> -eb
> 
> 
> 
> On 2/14/07, jon schatz <jon@...> wrote:
> >
> >
> >
> >
> >
> >
> > On Wed, 14 Feb 2007, ezra buchla wrote:
> >
> >  > since there's some speculation, hey
> >  >
> >  > neither 200e sequencers currently respond to midi clock, but this is
> >  > on the intended feature list for both. (i think that means the
> >  > firmware is technically "alpha.") 249e firmware development will be
> >  > slower since there won't be any more of the hardware.
> >  >
> >  > MIDI out is another intended feature (the 225 is sired for it); i
> >  > don't think any of us has specifically considered clock out but it's a
> >  > fine idea and it could be done if there's enough interest.
> >
> >  hi ezra/everyone,
> >
> >  how do you sync up your sequencers to external gear?
> >
> >  thanks,
> >
> >  -jon
> >
> >  "There are no differences but differences of degree between different
> > degrees
> >  of difference and no difference."
> >  - James, William. "Subjective Effects of Nitrous Oxide." Mind. 1882; Vol 7.
> >
>