200e

oh, now i understand what you mean (sorry for being slow, its late here)
As far as i can recall it advances at a pulse regardless of time
setting in advance mode. good night.

2008/3/27, tmeade1974 <tmeade1974@yahoo.com>:
> So if you set the 250e to Advance mode and apply a pulse at the
>  Start/Advance input, the sequencer will advance to the next stage
>  every time it receives a pulse, regardless of any time setting you
>  have set.  I don't have it in front of me but that "should" be the
>  "default" setting on the 250e, ya?
>  --tom
>
>
>
>  --- In 200e@yahoogroups.com, "soma_studios" <john@...> wrote:
>  >
>  > Hey y'all,
>  >
>  > Forgive the noob question, but I'm trying to get my head around the
>  250e stage selection
>  > behavior... From what I gather below, it should be possible to
>  advance the sequencer one
>  > stage per incoming clock pulse (assuming none of the
>  adv/sust/enble/stop functions are
>  > selected for that stage), or no? It seems that whenever a pulse
>  arrives at start/adv, the
>  > internal clock begins advancing as well...
>  >
>  > Thanks much
>  >
>  > John
>  >
>  >
>  > --- In 200e@yahoogroups.com, "ezra buchla" <ezra.buchla@> wrote:
>  > >
>  > > with midi, you can use the pulse outputs from the 225 note busses to
>  > > clock the 249e, 250e, or 291e in "advance" mode. i've used this a
>  > > lot... since each stage of each sequencer can be assigned logics w/r/t
>  > > incoming pulses, this allows for much richer behavior than just
>  > > syncing to a clock (which, again, we still plan to implement; the 249e
>  > > in particular already has a bpm data structure...).
>  > >
>  > > you could also use an analog pulse as a clock. any voltage with a
>  > > (>=10v) -> (<10v) transition will work as long as the voltage source
>  > > and the 200e share a ground.
>  > >
>  > > as for midi out, we're working on it and considering different
>  > > interface options. the strongest idea so far is to be able to
>  > > individually assign 225 busses to input or output CV, but this
>  > > requires some new GUI programmming. the wiring is all there already.
>  > >
>  > > -eb
>  > >
>  > >
>  > >
>  > > On 2/14/07, jon schatz <jon@> wrote:
>  > > >
>  > > >
>  > > >
>  > > >
>  > > >
>  > > >
>  > > > On Wed, 14 Feb 2007, ezra buchla wrote:
>  > > >
>  > > >  > since there's some speculation, hey
>  > > >  >
>  > > >  > neither 200e sequencers currently respond to midi clock, but
>  this is
>  > > >  > on the intended feature list for both. (i think that means the
>  > > >  > firmware is technically "alpha.") 249e firmware development
>  will be
>  > > >  > slower since there won't be any more of the hardware.
>  > > >  >
>  > > >  > MIDI out is another intended feature (the 225 is sired for it); i
>  > > >  > don't think any of us has specifically considered clock out
>  but it's a
>  > > >  > fine idea and it could be done if there's enough interest.
>  > > >
>  > > >  hi ezra/everyone,
>  > > >
>  > > >  how do you sync up your sequencers to external gear?
>  > > >
>  > > >  thanks,
>  > > >
>  > > >  -jon
>  > > >
>  > > >  "There are no differences but differences of degree between
>  different
>  > > > degrees
>  > > >  of difference and no difference."
>  > > >  - James, William. "Subjective Effects of Nitrous Oxide." Mind.
>  1882; Vol 7.
>  > > >
>  > >
>  >
>
>
>
>  ------------------------------------
>
>  Yahoo! Groups Links
>
>
>
>