50g

Okay, so I have the calculator connected via Xmodem. The connectivity 
kit is connected and I can see the directories and variables within the 
HP (I'm also able to send commands to the HP via CK).

However, I'm unable to upload/download any files (I'm trying to upload 
the NeoPolys library). All four of the upload/download options under 
the File menu in the connectivity kit are "greyed out" and not 
accessable. *confused* TIA

~S

Shawn D. King wrote:
> 
> 
> Okay, so I have the calculator connected via Xmodem. The connectivity
> kit is connected and I can see the directories and variables within the
> HP (I'm also able to send commands to the HP via CK).
> 
> However, I'm unable to upload/download any files (I'm trying to upload
> the NeoPolys library). All four of the upload/download options under
> the File menu in the connectivity kit are "greyed out" and not
> accessable. *confused* TIA

Once you are connected, you should see the contents of the calculator's 
HOME directory in the right pane.  Drag the NeoPolys file from elsewhere 
(that is, another folder on your computer) and drop it in this pane. 
This should transmit it to your calc.

After disconnecting, use the FILER (or other means -- I like Prof. 
Rautenberg's Filer6 myself) to move the file to port 2, that is, FLASH. 
  Use ON-C to reboot the calc, and the library should attach 
automatically.  You should then be able to access it via RS-2, the LIB 
menu.  (Alternatively you could use << 1494 TMENU >>.  I have that 
little program stored in a MATH directory under HOME.)

Good luck.

PS.  Also, note that for the ROM menu of the Connectivity Kit to be 
enabled, you have to specify a USB connection instead of Auto Connect -- 
I mention this because it isn't obvious, and I needed to remember this 
today to install a new ROM image...

-- 
Dave Boyd

--- In 50g@yahoogroups.com, Dave Boyd <boydda@...> wrote:
>
> Once you are connected, you should see the contents of the 
calculator's 
> HOME directory in the right pane.  Drag the NeoPolys file from 
elsewhere 
> (that is, another folder on your computer) and drop it in this 
pane. 
> This should transmit it to your calc.
> 
> After disconnecting, use the FILER (or other means -- I like Prof. 
> Rautenberg's Filer6 myself) to move the file to port 2, that is, 
FLASH. 
>   Use ON-C to reboot the calc, and the library should attach 
> automatically.  You should then be able to access it via RS-2, the 
LIB 
> menu.  (Alternatively you could use << 1494 TMENU >>.  I have that 
> little program stored in a MATH directory under HOME.)
> 
> Good luck.
> 
> PS.  Also, note that for the ROM menu of the Connectivity Kit to be 
> enabled, you have to specify a USB connection instead of Auto 
Connect -- 
> I mention this because it isn't obvious, and I needed to remember 
this 
> today to install a new ROM image...
> 
> -- 
> Dave Boyd
>

Dave,
Thanks for the help. Worked great! I was able to get the Bode-Routh 
lib installed, too. Now if I could only remember how to do that 
stuff...
~Shawn