68300

I doesn't.

---   Avoid computer viruses, Practice safe hex  ---

-- Specializing in small, cost effective
    embedded control systems --

http://www.smithmachineworks.com/embedprod.html


Robert L. (Bob) Smith
Smith Machine Works, Inc.
9900 Lumlay Road
Richmond, VA 23236   804/745-1065

  bobsmith5@...

----- Original Message ----- 
From: "Dimiter Popoff" <tgi_earth@...>
To: <68300@yahoogroups.com>
Sent: Wednesday, June 04, 2003 4:32 AM
Subject: [68300] Re: Programming External Flash


> A third way which I used on a 68340 is to drive the respective lines
> via JTAG (assuming that the 332 has boundary scan as does the 340).
>
> Dimiter
>
>
> > > I have an external FLASH (1M x 16)interfaced to MC68332=20
> > > where i will be having my application program to startup at=20
> > > power on. This Flash is only available in SO or SSOP package
> > > (No DIP package). How can i burn in my application program=20
> > > into the flash?=20
> >
> > there are 2 ways:
> > either preprogram the flash in a standard programmer
> > or program the flash via the bdm interface=20
> >  (hard & software from http://www.pemicro.com)
> >
> > greetings Leopold
> >
>
> --------------------------------------------------------------------
> Dimiter Popoff
> Transgalactic Instruments, Gourko Str. 25 b, 1000 Sofia, Bulgaria
> http://transgalactic.freeyellow.com
>
>
>
> ---------------------------------------------------
> To unsubscribe from this group, send an email to:
> 68300-unsubscribe@yahoogroups.com
>
> To learn more about Motorola Microcontrollers, please visit
> http://www.motorola.com/mcu
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>