The Yamaha AN1x Synthesizer mailing list

--- In AN1x-list@yahoogroups.com, Ondrash Daree <ondrash77@...> 
wrote:
>
> 
> 
> Hello friends.
> 
> I have a
> problem with synchronization between An1x and Cubase SX3. 
Synchronization has lost.
> I have set up MIDI TxCh1, RxCh1, TxpatternCh2, Tempo of arpeggio 
as MIDI. When I press Play in SX3 and record MIDI events (I have 
chosen an Arp.preset) AN1x plays with
> same tempo like Cubase but without accuracy timing. I have tried 
to record arpeggio
> events and they are not aligned to the grid.  I have found out, 
that my AN1x LEDs (on a
> panel) occasionally blinked. It is strange… Could you help me with 
this issue?
> I know that An1x needs good power supply. I use AC adaptor with 
800mA. Is it
> OK?
> 
> 
> 
> Many Thanks.
> 
> Ondrash

Under the VOICE COMMON menu, set Tempo to MIDI to synchronize the 
Arp/Seq to MIDI Clock from your sequencer. If your suffering from 
drift, try beginning the sequencer a measure or two earlier to allow 
time for the AN1x to 'catch up' and stay in sync.  


If you are using a multi-port MIDI Interface with many devices, I'd 
suggest you move the AN1x to a higher number port to avoide any 
delay resulting from MIDI slop.

Regards,

Jon

Regards,

Jon