The Yamaha AN1x Synthesizer mailing list

Hello friends.

I have a
problem with synchronization between An1x and Cubase SX3. Synchronization has lost.
I have set up MIDI TxCh1, RxCh1, TxpatternCh2, Tempo of arpeggio as MIDI. When I press Play in SX3 and record MIDI events (I have chosen an Arp.preset) AN1x plays with
same tempo like Cubase but without accuracy timing. I have tried to record arpeggio
events and they are not aligned to the grid.  I have found out, that my AN1x LEDs (on a
panel) occasionally blinked. It is strange� Could you help me with this issue?
I know that An1x needs good power supply. I use AC adaptor with 800mA. Is it
OK?



Many Thanks.

Ondrash





[Non-text portions of this message have been removed]

--- In AN1x-list@yahoogroups.com, Ondrash Daree <ondrash77@...> 
wrote:
>
> 
> 
> Hello friends.
> 
> I have a
> problem with synchronization between An1x and Cubase SX3. 
Synchronization has lost.
> I have set up MIDI TxCh1, RxCh1, TxpatternCh2, Tempo of arpeggio 
as MIDI. When I press Play in SX3 and record MIDI events (I have 
chosen an Arp.preset) AN1x plays with
> same tempo like Cubase but without accuracy timing. I have tried 
to record arpeggio
> events and they are not aligned to the grid.  I have found out, 
that my AN1x LEDs (on a
> panel) occasionally blinked. It is strange… Could you help me with 
this issue?
> I know that An1x needs good power supply. I use AC adaptor with 
800mA. Is it
> OK?
> 
> 
> 
> Many Thanks.
> 
> Ondrash

Under the VOICE COMMON menu, set Tempo to MIDI to synchronize the 
Arp/Seq to MIDI Clock from your sequencer. If your suffering from 
drift, try beginning the sequencer a measure or two earlier to allow 
time for the AN1x to 'catch up' and stay in sync.  


If you are using a multi-port MIDI Interface with many devices, I'd 
suggest you move the AN1x to a higher number port to avoide any 
delay resulting from MIDI slop.

Regards,

Jon

Regards,

Jon

Hello John.
Thank you for your answer. Voice Common I exactly use... I have a MIDI
Interface from MOTU MidiTimepiece AV (connected via Parallel Port)
on a second port. I tried to connect AN1x directly to MIDI
ports, which are on my sound card (EMU-1820). I tried AN1x with my friend in
his studio. The problem still persists. I don't have a problem with "catch
up" synchronization. But stay in sync. Synchronization is loosing often during
two bars. I mean that is happen when leds blinked brightly on the panel.. I can�t
quit say if it is a new
problem because I didn�t use synchronization before.


 


Any another
idea? 



Thank you so much.

----- Original Message ----
From: Jon <jondl_2000@...>
To: AN1x-list@yahoogroups.com
Sent: Thursday, October 12, 2006 1:24:40 PM
Subject: Re: [AN1x] Synchronization problem









  


    
            --- In AN1x-list@yahoogrou ps.com, Ondrash Daree <ondrash77@. ..> 

wrote:

>

> 

> 

> Hello friends.

> 

> I have a

> problem with synchronization between An1x and Cubase SX3. 

Synchronization has lost.

> I have set up MIDI TxCh1, RxCh1, TxpatternCh2, Tempo of arpeggio 

as MIDI. When I press Play in SX3 and record MIDI events (I have 

chosen an Arp.preset) AN1x plays with

> same tempo like Cubase but without accuracy timing. I have tried 

to record arpeggio

> events and they are not aligned to the grid.  I have found out, 

that my AN1x LEDs (on a

> panel) occasionally blinked. It is strange� Could you help me with 

this issue?

> I know that An1x needs good power supply. I use AC adaptor with 

800mA. Is it

> OK?

> 

> 

> 

> Many Thanks.

> 

> Ondrash



Under the VOICE COMMON menu, set Tempo to MIDI to synchronize the 

Arp/Seq to MIDI Clock from your sequencer. If your suffering from 

drift, try beginning the sequencer a measure or two earlier to allow 

time for the AN1x to 'catch up' and stay in sync.  



If you are using a multi-port MIDI Interface with many devices, I'd 

suggest you move the AN1x to a higher number port to avoide any 

delay resulting from MIDI slop.



Regards,



Jon



Regards,



Jon





    
  

    
    




<!--

Jon a \ufffdcrit :

>--- In AN1x-list@yahoogroups.com, Ondrash Daree <ondrash77@...> 
>wrote:
>  
>
>>
>>Hello friends.
>>
>>I have a
>>problem with synchronization between An1x and Cubase SX3. 
>>    
>>
>Synchronization has lost.
>  
>
>>I have set up MIDI TxCh1, RxCh1, TxpatternCh2, Tempo of arpeggio 
>>    
>>
>as MIDI. When I press Play in SX3 and record MIDI events (I have 
>chosen an Arp.preset) AN1x plays with
>  
>
>>same tempo like Cubase but without accuracy timing. I have tried 
>>    
>>
>to record arpeggio
>  
>
>>events and they are not aligned to the grid.  I have found out, 
>>    
>>
>that my AN1x LEDs (on a
>  
>
>>panel) occasionally blinked. It is strange\ufffd Could you help me with 
>>    
>>
>this issue?
>  
>
>>I know that An1x needs good power supply. I use AC adaptor with 
>>    
>>
>800mA. Is it
>
Hello !
On mine the "scene" LEDs blink sometimes ... don't care , it is not a 
failure but more likely a minor bug, it depends on the current patch.. 
The stock power supply is rated at 12V DC - 700 mA : 800 is enough. In 
fact the external supply is only a transformer and a rectifier bridge, 
the voltage regulation circuits are inside the synth . And they are (i 
think..) reliable . With mostly digital electronics if one voltage is 
missing or too low nothing works .
@+
J.F.

>  
>
>>OK?
>>
>>
>>
>>Many Thanks.
>>
>>Ondrash
>>    
>>
>
>Under the VOICE COMMON menu, set Tempo to MIDI to synchronize the 
>Arp/Seq to MIDI Clock from your sequencer. If your suffering from 
>drift, try beginning the sequencer a measure or two earlier to allow 
>time for the AN1x to 'catch up' and stay in sync.  
>
>
>If you are using a multi-port MIDI Interface with many devices, I'd 
>suggest you move the AN1x to a higher number port to avoide any 
>delay resulting from MIDI slop.
>
>Regards,
>
>Jon
>
>Regards,
>
>Jon
>
>
>
>
>Community email addresses:
>  Post message: AN1x-list@yahoogroups.com
>  Subscribe:    AN1x-list-subscribe@yahoogroups.com
>  Unsubscribe:  AN1x-list-unsubscribe@yahoogroups.com
>  List owner:   AN1x-list-owner@yahoogroups.com
>
>Shortcut URL to this page:
>   http://groups.yahoo.com/group/AN1x-list
>
>The AN1x Control Synthesizer FAQ::
>  http://www.geocities.com/jondl_2000/an1x_faq/an1x_faq_toc.htm
> 
>Yahoo! Groups Links
>
>  
>




---
avast! Antivirus: message Sortant propre.
Base de donn\ufffdes des virus (VPS): 0641-3, 12/10/2006
Test du: 12/10/2006 23:08:58
avast! - copyright (c) 2000-2006 ALWIL Software.
http://www.avast.com

My AN1X syncs to Sonar and is quite low on the MIDI chain (channel 11). 
With the LED's flashing and things getting out of sync is your AN1X getting any too much other MIDI info that its not using like sysex ect?
If Cubase has a MIDI output filter/selector it could be worth tweaking that?
Is it only the AN1X thats going out of sync? I lost a lot of hair fine tuning my music PC to sync nicely with the outside world. 

Rob.

Jeff <jf.serviere@wanadoo.fr> wrote: Jon a écrit :

>--- In AN1x-list@yahoogroups.com, Ondrash Daree  
>wrote:
>  
>
>>
>>Hello friends.
>>
>>I have a
>>problem with synchronization between An1x and Cubase SX3. 
>>    
>>
>Synchronization has lost.
>  
>
>>I have set up MIDI TxCh1, RxCh1, TxpatternCh2, Tempo of arpeggio 
>>    
>>
>as MIDI. When I press Play in SX3 and record MIDI events (I have 
>chosen an Arp.preset) AN1x plays with
>  
>
>>same tempo like Cubase but without accuracy timing. I have tried 
>>    
>>
>to record arpeggio
>  
>
>>events and they are not aligned to the grid.  I have found out, 
>>    
>>
>that my AN1x LEDs (on a
>  
>
>>panel) occasionally blinked. It is strange… Could you help me with 
>>    
>>
>this issue?
>  
>
>>I know that An1x needs good power supply. I use AC adaptor with 
>>    
>>
>800mA. Is it
>
Hello !
On mine the "scene" LEDs blink sometimes ... don't care , it is not a 
failure but more likely a minor bug, it depends on the current patch.. 
The stock power supply is rated at 12V DC - 700 mA : 800 is enough. In 
fact the external supply is only a transformer and a rectifier bridge, 
the voltage regulation circuits are inside the synth . And they are (i 
think..) reliable . With mostly digital electronics if one voltage is 
missing or too low nothing works .
@+
J.F.

>  
>
>>OK?
>>
>>
>>
>>Many Thanks.
>>
>>Ondrash
>>    
>>
>
>Under the VOICE COMMON menu, set Tempo to MIDI to synchronize the 
>Arp/Seq to MIDI Clock from your sequencer. If your suffering from 
>drift, try beginning the sequencer a measure or two earlier to allow 
>time for the AN1x to 'catch up' and stay in sync.  
>
>
>If you are using a multi-port MIDI Interface with many devices, I'd 
>suggest you move the AN1x to a higher number port to avoide any 
>delay resulting from MIDI slop.
>
>Regards,
>
>Jon
>
>Regards,
>
>Jon
>
>
>
>
>Community email addresses:
>  Post message: AN1x-list@yahoogroups.com
>  Subscribe:    AN1x-list-subscribe@yahoogroups.com
>  Unsubscribe:  AN1x-list-unsubscribe@yahoogroups.com
>  List owner:   AN1x-list-owner@yahoogroups.com
>
>Shortcut URL to this page:
>   http://groups.yahoo.com/group/AN1x-list
>
>The AN1x Control Synthesizer FAQ::
>  http://www.geocities.com/jondl_2000/an1x_faq/an1x_faq_toc.htm
> 
>Yahoo! Groups Links
>
>  
>




---
avast! Antivirus: message Sortant propre.
Base de donnÚes des virus (VPS): 0641-3, 12/10/2006
Test du: 12/10/2006 23:08:58
avast! - copyright (c) 2000-2006 ALWIL Software.
http://www.avast.com





Community email addresses:
  Post message: AN1x-list@yahoogroups.com
  Subscribe:    AN1x-list-subscribe@yahoogroups.com
  Unsubscribe:  AN1x-list-unsubscribe@yahoogroups.com
  List owner:   AN1x-list-owner@yahoogroups.com

Shortcut URL to this page:
   http://groups.yahoo.com/group/AN1x-list

The AN1x Control Synthesizer FAQ::
  http://www.geocities.com/jondl_2000/an1x_faq/an1x_faq_toc.htm
 
Yahoo! Groups Links






 		
---------------------------------
 Now you can scan emails quickly with a reading pane. Get the new Yahoo! Mail.

[Non-text portions of this message have been removed]

--- In AN1x-list@yahoogroups.com, Rob Hill <m_moog8925@...> wrote:
>
> My AN1X syncs to Sonar and is quite low on the MIDI chain (channel 11). 
> With the LED's flashing and things getting out of sync is your AN1X getting any too much 
other MIDI info that its not using like sysex ect?

Yeah, the LED blinking doesn't appear to be an issue - mine and every other AN1x I've seen 
has always behaved that way. We used to speculate on why this occurs - never did figure it 
out despite some imaginative theories ;-) hahahaha


> If Cubase has a MIDI output filter/selector it could be worth tweaking that?
> Is it only the AN1X thats going out of sync? I lost a lot of hair fine tuning my music PC to 
sync nicely with the outside world. 
> 
> Rob.

Thois are all good suggestions for him to try out? Thanks.

Hello guys. I am going to visit my parents for the weekend. I will try it on sunday. 
Best Regards.

Odrash....

----- Original Message ----
From: Jon <jondl_2000@...>
To: AN1x-list@yahoogroups.com
Sent: Friday, October 13, 2006 12:25:33 AM
Subject: Re: [AN1x] Synchronization problem









  


    
            --- In AN1x-list@yahoogrou ps.com, Rob Hill <m_moog8925@ ...> wrote:

>

> My AN1X syncs to Sonar and is quite low on the MIDI chain (channel 11). 

> With the LED's flashing and things getting out of sync is your AN1X getting any too much 

other MIDI info that its not using like sysex ect?



Yeah, the LED blinking doesn't appear to be an issue - mine and every other AN1x I've seen 

has always behaved that way. We used to speculate on why this occurs - never did figure it 

out despite some imaginative theories ;-) hahahaha



> If Cubase has a MIDI output filter/selector it could be worth tweaking that?

> Is it only the AN1X thats going out of sync? I lost a lot of hair fine tuning my music PC to 

sync nicely with the outside world. 

> 

> Rob.



Thois are all good suggestions for him to try out? Thanks.





    
  

    
    




<!--

Hello. Apologize
for delay. I am so busy. I have tried to resolve this issue, but without
success. I tried two AN1x and problem still persists. I mean that is common
issue of AN1x. If you want, you can try this one:


 


Choose some arp. Sound on AN1xSet arp. clock to MIDISet sync in SX3
Record some region into SX3.
     (channel of AN1x track set to any, ch1 is not working well) open piano roll and check Note
     On position for  notes (if you didn�t
     catch first note to start position, select all notes and move them to
     right position)check All Note On position

 


I found
that Note On position is not accurate within a region. The delay of notes is not
same. Notes stumble. I must use a quantization�. What's your idea? 


 


I have
resolved this problem with other solution. I have set a tempo as SX3 (133 BPM
for example) and adjust start note of sequence to the initial position. 


 


Have a nice
day

----- Original Message ----
From: Ondrash Daree <ondrash77@...>
To: AN1x-list@yahoogroups.com
Sent: Friday, October 13, 2006 3:02:28 PM
Subject: Re: [AN1x] Synchronization problem









  


    
            Hello guys. I am going to visit my parents for the weekend. I will try it on sunday. 

Best Regards.



Odrash....



----- Original Message ----

From: Jon <jondl_2000@yahoo. com>

To: AN1x-list@yahoogrou ps.com

Sent: Friday, October 13, 2006 12:25:33 AM

Subject: Re: [AN1x] Synchronization problem



--- In AN1x-list@yahoogrou ps.com, Rob Hill <m_moog8925@ ...> wrote:



>



> My AN1X syncs to Sonar and is quite low on the MIDI chain (channel 11). 



> With the LED's flashing and things getting out of sync is your AN1X getting any too much 



other MIDI info that its not using like sysex ect?



Yeah, the LED blinking doesn't appear to be an issue - mine and every other AN1x I've seen 



has always behaved that way. We used to speculate on why this occurs - never did figure it 



out despite some imaginative theories ;-) hahahaha



> If Cubase has a MIDI output filter/selector it could be worth tweaking that?



> Is it only the AN1X thats going out of sync? I lost a lot of hair fine tuning my music PC to 



sync nicely with the outside world. 



> 



> Rob.



Thois are all good suggestions for him to try out? Thanks.



<!--