The Yamaha AN1x Synthesizer mailing list

Hi Jammie,

Yes I have an option to disable SysEx messages on the external synth. I turned it off and it didn't work so it means it is using MIDI CC. 

Can I setup the ANX1 to transmit SysEx messages instead? I will look in the manual but I don't remember seeing this option.

Thanks

--- In AN1x-list@yahoogroups.com, "jammie" <jammie.emma@...> wrote:
>
> is  the an1x sending it in sysex or midi cc if its sending sysex there should be a filter in you other synth were you can switch of sysex recieve 
>   ----- Original Message ----- 
>   From: Peter Korsten 
>   To: AN1x-list@yahoogroups.com 
>   Sent: Wednesday, July 14, 2010 5:08 PM
>   Subject: Re: [AN1x] Disable program change MIDI transmission
> 
> 
>     
>   Op 13-7-2010 22:22, jeromestpierre schreef:
> 
>   > I cannot find out how to disable the program change MIDI messages that are sent whenever I change the patch number while controlling another synth.
>   >
>   > I looked in the manual and I couldn't find anything but I am still skeptical.
>   >
>   > Is it possible to turn that off?
> 
>   Possibly, you would need an external MIDI filter for this. But what sort 
>   of set-up do you have that requires you to change the program, but only 
>   locally? Or are you using the sound engine of both the AN1x and the 
>   external synth?
> 
>   On my EX5, you can set several zones on the keyboard, and per zone 
>   indicate whether a zone goes to the internal sound engine, MIDI out A, 
>   MIDI out B, or any combination thereof. But program change messages are 
>   still transmitted.
> 
>   - Peter
> 
> 
>   
> 
> 
> ------------------------------------------------------------------------------
> 
> 
> 
>   No virus found in this incoming message.
>   Checked by AVG - www.avg.com 
>   Version: 8.5.441 / Virus Database: 271.1.1/3003 - Release Date: 07/13/10 18:36:00
> 
> 
> [Non-text portions of this message have been removed]
>