Atari-Midi Archives

Hi!

At the moment I can't remember a ready made thrubox with 16 outputs.

Here is one with 8 outputs:

http://www.amazon.com/MIDI-Solutions-T8-8-Output-Active/dp/B0002GHAEG

Also M-Audio has 8 channel thru boxes...

But maybe some of your synths have a midi thru. Normally up to 3 gadgets can
be switched in line via MIDI thru without (big) problems. In this way you could also work with a
thrubox with only 4 outputs (4 output with up to 4 gadgets per output)

for the DIY guys: Maplin had a simple 8 output thrubox:
http://www.wiseguysynth.com/larry/schematics/thru/

I built this one and it works fine! The optocoupler circuit in this design has been wired correctly
To offer a low delay time - most circuits on the web miss the resistor on the base of the
optocoupler output darlington - this make the optocoupler quite slow.

Ciao
Peter


From: atari-midi-archives@yahoogroups.com [mailto:atari-midi-archives@yahoogroups.com] On Behalf Of Wayne
Sent: Monday, July 20, 2009 10:47 AM
To: atari-midi-archives@yahoogroups.com
Subject: RE: [atari-midi-archives] MIDI breakout box




Ready made so I can fit all 14 of my rack units into Notator instead of connecting and disconnecting

--- On Mon, 7/20/09, Ullrich Peter <peter.ullrich@...> wrote:

From: Ullrich Peter <peter.ullrich@...>
Subject: RE: [atari-midi-archives] MIDI breakout box
To: "atari-midi-archives@yahoogroups.com" <atari-midi-archives@yahoogroups.com>
Date: Monday, July 20, 2009, 1:40 AM

Do you prefer a DIY solution or a ready made unit?

Ciao
Peter

From: atari-midi-archives @yahoogroups. com [mailto:atari- midi-archives@ yahoogroups. com] On Behalf Of Wayne
Sent: Monday, July 20, 2009 10:33 AM
To: atari-midi-archives @yahoogroups. com
Subject: Re: [atari-midi- archives] MIDI breakout box



Yeah, a Thru Box is what I need.

--- On Mon, 7/20/09, PeWe <ha-pewe@gmx. de> wrote:

From: PeWe <ha-pewe@gmx. de>
Subject: Re: [atari-midi- archives] MIDI breakout box
To: atari-midi-archives @yahoogroups. com
Date: Monday, July 20, 2009, 1:17 AM

What do you mean w/ "midi-breakout- box",- a Midi Thru Box, a Midi Routing Matrix or a more complex matrix which processes midi data (for live-usage) also ?



duh! isnt it obvious??? schrieb:

Hey guys, been awhile, found my Log3 awhile back. Now trying to figure out a good MIDI breakout box for a bunch of my synths (picked up quite a few new ones that I wanna rack up. Suggestions?

This group has been a big help.