AVR-Chat

hi Gavin,
hmm, i might take a look at that. i only recently got a cable for it. and i
really want to start programming it. So this might be the motivation i need.

Cheers,
Paul EI5GTB

On Tue, Jun 10, 2008 at 12:49 PM, dingley76 <dingley76@yahoo.com> wrote:

>   Hi,
> This is an old topic, but I have also purchased the MyAVR programmer
> board and was also disappointed by the fact that the accompanying
> software was in German. I have not tried the board yet (I haven't
> really got into AVR programming yet!), but looking at the documentation
> it appears that as long as the board is connected, AVR Studio can be
> set-up to communicate with it. The documentation states:
>
> QUOTE
>
> Use with AVR Studio Version 4.12.498
> If you use the AVR studio, please choose "AVR Prog" in
> the menu Tools. The programmer has to be connected if
> you select the menu item. AVR Prog will find the mySmartUSB
> automatically.
>
> AVR-Prog is looking only at the COM-Ports 1 to 4. If the
> virtual COM-Port of mySmartUSB is higher then 4 AVR
> studio will not find it. In this case you need to select a valid
> COM-port in the system settings.
> Follow this procedure:
> � open the device manager
> � open the rubric: Ports (COM and LPT) themed open
> USB controller
> � choose driver: "CP210x USB to UART Bridge Controller
> (COMx)"
> � right mouse button -> Properties-> Port settings
> -> Advanced
> � modify and confirm COM-port number
> � we recommend COM3 or COM4, Please notice possible
> driver conflicts
>
> END QUOTE
>
> The MyAVR document from which this was found was: techb_mysmartusb.pdf
>
> Cheers,
>
> Gavin
>
>
> --- In AVR-Chat@yahoogroups.com <AVR-Chat%40yahoogroups.com>, "ei5gtb"
> <paul@...> wrote:
> >
> > Hello, i recently purchased a "my avr" board from http://www.myavr.de/
> > But much to my disappointment the programming application was in
> > german. I am just a beginner, and was hoping to use this board to
> > educate myself. Could anyone advise if this board can be used with
> > other programming software? and if so, which is the best recommended
> one.
> > Many Thanks,
> >
> > Paul.
> >
>
>  
>


[Non-text portions of this message have been removed]