AVR-Chat

Thanks Alex,

 

I tried slowing the SPI clock. No reply.

 

I didn't enable the external clock. I enabled the internal RC 4Mhz and 64ms
reset option with CLKDIV8 enabled.

 

Dave.

 

From: AVR-Chat@yahoogroups.com [mailto:AVR-Chat@yahoogroups.com] On Behalf
Of Alex Shepherd
Sent: 20 November 2012 12:12
To: AVR-Chat@yahoogroups.com
Subject: RE: [AVR-Chat] Bricked ATTINY SMD

 

  

> I have inadvertently bricked an ATTINY13 after trying to set the fuses.

Well you may have:

1) Set the AVRs clock to be too slow for the SPI clock speed in your ICSP.
Try slowing your ICSP programmer speed right down.

2) you've enabled the external xtal/clock so it will now need some sort of
clock signal on that pin, while you revive it by setting the fuses with a
ICSP Programmer back to what you need.

HTH

Alex



[Non-text portions of this message have been removed]