AVR-Chat

Hi All,

Sorry for previous post.

I tied a 16 Mb mmc card to an atm162 in SPI mode. All working at 2.78
Volts.
First I wanted to initialize it so I sent cmd0 and the respond was 0x01. I
think it´s ok I mean idle state.
Then i repeatedly sent cmd1 however i just got 0x01. No mather how many
times i send cmd1 i cannot get 0x00 from the card.

Does anyone had this problem before?

PD:The mmc card is 16 Mb card from SimpleTech.