AVR-Chat

I think in my init sequence, I send up too 254 cmd01's..  That seems 
to be enough....

--- In AVR-Chat@yahoogroups.com, JChavez@s... wrote:
> 
> 
> 
> 
> Hi All,
> 
> Sorry for previous post.
> 
> I tied a 16 Mb mmc card to an atm162 in SPI mode. All working at 
2.78
> Volts.
> First I wanted to initialize it so I sent cmd0 and the respond was 
0x01. I
> think it´s ok I mean idle state.
> Then i repeatedly sent cmd1 however i just got 0x01. No mather how 
many

> times i send cmd1 i cannot get 0x00 from the card.
> 
> Does anyone had this problem before?
> 
> PD:The mmc card is 16 Mb card from SimpleTech.

Hi All,

Sorry for previous post.

I tied a 16 Mb mmc card to an atm162 in SPI mode. All working at 2.78
Volts.
First I wanted to initialize it so I sent cmd0 and the respond was 0x01. I
think it´s ok I mean idle state.
Then i repeatedly sent cmd1 however i just got 0x01. No mather how many
times i send cmd1 i cannot get 0x00 from the card.

Does anyone had this problem before?

PD:The mmc card is 16 Mb card from SimpleTech.