Yahoo Groups archive

AVR-Chat

Index last updated: 2026-04-28 22:41 UTC

Thread

Re: [AVR-Chat] Debugwire, stk-500 and M168

Re: [AVR-Chat] Debugwire, stk-500 and M168

2008-01-22 by John Samperi

At 11:00 AM 22/01/2008, you wrote:
>indications are that the device is hosed up somehow.

Try and use the STK500 in HVPP mode to check the fuses,
maybe the clock gets messed up.

Regards

John Samperi

********************************************************
Ampertronics Pty. Ltd.
11 Brokenwood Place Baulkham Hills, NSW 2153 AUSTRALIA
Tel. (02) 9674-6495       Fax (02) 9674-8745
Email: john@ampertronics.com.au
Website  http://www.ampertronics.com.au
*Electronic Design * Custom Products * Contract Assembly
********************************************************

Re: Debugwire, stk-500 and M168

2008-01-22 by Dyan Fassett

I had 5 M168's that were bricked my JTAGICE MKII was useless... 
Got a AVR Dragon and a Dragon Rider then using HVPP mode found that 
the SPIEN fuse was reset and the clocks were messed up. 
I reprogrammed them all and recovered the price of the Dragon Rider :)
Dyan...KV9R


--- In AVR-Chat@yahoogroups.com, John Samperi <samperi@...> wrote:
Show quoted textHide quoted text
>
> At 11:00 AM 22/01/2008, you wrote:
> >indications are that the device is hosed up somehow.
> 
> Try and use the STK500 in HVPP mode to check the fuses,
> maybe the clock gets messed up.
> 
> Regards
> 
> John Samperi

Re: [AVR-Chat] Re: Debugwire, stk-500 and M168

2008-01-22 by David VanHorn

On Jan 22, 2008 9:06 AM, Dyan Fassett <kv9r@yahoo.com> wrote:
> I had 5 M168's that were bricked my JTAGICE MKII was useless...
> Got a AVR Dragon and a Dragon Rider then using HVPP mode found that
> the SPIEN fuse was reset and the clocks were messed up.
> I reprogrammed them all and recovered the price of the Dragon Rider :)
> Dyan...KV9R

Unfortunately, this is looking like yet another "delicate" debugging
platform from Atmel.

EXTREMELY dissapointing.

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.