Boss VF-1 Effect Processor

Just a suggestion, but if you open up the unit and can locate the battery,
you might try removing it briefly to clear any glitch that may remain in its
RAM memory. It may also be necessary to replace the ROM chip if that doesn't
work

In my considerable experience with computers, it was necessary at times to
remove or temporarily short the motherboard battery to clear problems that
were perpetuated by having the battery keeping the circuits active.

Good luck,

David
  -----Original Message-----
  From: FFT [mailto:fft@...]
  Sent: Thursday, March 18, 2004 8:40 PM
  To: BossVF1@yahoogroups.com
  Subject: [BossVF1] Boss VF1 problem. Please help me.





  Hy.

  I saw a message in VF1-BOSS yahoo groups, about a problem with the
hardware. I thought you can help me.

  When i turn on my vf1, the start up screen stops, with the VF1 boss logo,
and doesn t change. I did the factory reset, with the parameter buttons,
with no results. I turned off many times , and nothing.

  What can i do?

  thanks

  colabra



  [Non-text portions of this message have been removed]



----------------------------------------------------------------------------
--
  Yahoo! Groups Links

    a.. To visit your group on the web, go to:
    http://groups.yahoo.com/group/BossVF1/

    b.. To unsubscribe from this group, send an email to:
    BossVF1-unsubscribe@yahoogroups.com

    c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.



[Non-text portions of this message have been removed]