Boss VF-1 Effect Processor

ajclannad <jon66mary@...> wrote:    --- In BossVF1@yahoogroups.com, Gary Brown <brown4133@...> wrote:
>
> 
> 
> ajclannad <jon66mary@...> wrote:  Can anyone please assist?
> I have just got my s/h VF-1, powered it up.....but no sound! There
> seems to be no input level at all with front guitar jack or rear input.
> The display looks fine and all knobs seem to work...but no signal!
> I have checked obvious leads, jacks etc. 
> I am using a modded power supply at 13.5 volts.....but it wouldn't
> stop any signal, would it?
> Any help would be good!
> 
> 
> 
> 
>     
> ---------------------------------
>   YAHOO! GROUPS LINKS 
> 
>     
>     Visit your group "BossVF1" on the web.
>     
>     To unsubscribe from this group, send an email to:
>  BossVF1-unsubscribe@yahoogroups.com
>     
>     Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service. 
> 
>     
> ---------------------------------
>   
> Try pressing the big knob to make sure you haven't turned the
effects off.  The VF-1 can be set up so it mutes all sound when the
button is pressed,  otherwise it just lets the signal pass.  It'll say
on the front panel if effects are on or off.
> 
> 
> [Non-text portions of this message have been removed]
>
I tried that....no good.....but thanks.
Could some input fuse or something have gone?
Jon


I just opened mine up to have a look.  There doesn't appear to be a fuse of any kind, but you might check to make sure the wires that plug into the mainboard are secure.
   
  I'm not an expert on equipment repair, so beyond that there's no more advice I can give.  I have noticed that with some pieces of gear, like the Alesis Quadraverb and the Art X-15 footpedal, wires come loose from their headers every once and a while.  
   
  -Gary


[Non-text portions of this message have been removed]