Casio CZ/VZ Files... part of CZsynth

Great, and thank's for this professional information. I transmitted it directly to www.audiofanzine.fr. People still using VZ1/VZ10M are quite rare nowadays, and the quality of this topic is good enough, so as to be spread to all it's users.
Happy thank's from a Swiss user of VZ1.
----Message d'origine----
De : mw9056@...
Date : 14/01/2014 - 22:55 (UTC)
A : CZ-VZ-Files@yahoogroups.com
Objet : [CZ-VZ-Files] VZ-10M correct Sysex settings
 
  
    
      
      
      
After many frustrating attempts to send sysex patch banks to my VZ-10M, I found a combination that works! I wanted to share my findings with the community so others might avoid injuring themselves/gear/brain cells.
Set Exclusive=ENA under Menu 3-04
Set Internal=OFF under Menu 3-01
Set Save/Load=LOAD, Card/MIDI=MIDI, Data=VC+OP under Menu 3-02
Set the MIDI receive channel to 1 under Menu 3-03
For some reason, my VZ-10M would show an "Error check system" until I finally set the MIDI receive channel to 1. Don't know why this magically worked, but it did.
If using MIDI-OX, open the Sysex view and Configure buffers:
Low level input and output buffers both set to 128 bytes, 8 number.
Delay between buffers 100, delay after F7 checked and set to 60.
This also works in Bome's Send SX without any extra changes in that program.
Thank you to everyone who contributed patch banks. I've tried 3 so far that sound great.