backlights
2013-06-06 by charlie midi gfa
where can a backlight for a fz10m be bought ? charlie
Thread
backlights
Re: [CZ-VZ-Files] backlights
2013-06-09 by Daniel Forró
http://www.backlight4you.com/product_info.php/info/p956_EL-Panel--blue-green--41mm-x-66mm--laminated.html http://www.backlight4you.com/product_info.php/info/p955_EL-Panel--softyellow--41mm-x-66mm--laminated.html Second one is great, I bought this color for my Korg WS. Daniel Forro
Show quoted textHide quoted text
On 7 Jun, 2013, at 5:04 AM, charlie midi gfa wrote: > where can a backlight for a fz10m be bought ? > > charlie
Re: [CZ-VZ-Files] backlights
2013-06-10 by charlie midi gfa
thanks looking is all thats required if the backlight is "spotty" is a new elpanel ? when is a invertor needed? charlie ----- Original Message -----
Show quoted textHide quoted text
From: "Daniel Forró" <dan.for@...> To: <CZ-VZ-Files@yahoogroups.com> Sent: Sunday, June 09, 2013 7:51 PM Subject: Re: [CZ-VZ-Files] backlights > http://www.backlight4you.com/product_info.php/info/p956_EL-Panel--blue-green--41mm-x-66mm--laminated.html > > http://www.backlight4you.com/product_info.php/info/p955_EL-Panel--softyellow--41mm-x-66mm--laminated.html > > Second one is great, I bought this color for my Korg WS. > > Daniel Forro > > > On 7 Jun, 2013, at 5:04 AM, charlie midi gfa wrote: > >> where can a backlight for a fz10m be bought ? >> >> charlie > > > > ------------------------------------ > > Yahoo! Groups Links > > > >
Re: [CZ-VZ-Files] backlights
2013-06-10 by Daniel Forró
Inverter is necessary for EL foil, so it is there somewhere inside the machine - near the PSU or near the display, you can see two wires going to the display for backlight. Just change EL panel carefully (because sometimes the old one is little bit glued inside, use long thin knife or cutter carefully, but never tried to open display as you will misallign contacts), solder new one (shortly! not to burn laminate), that's all. If wires for the backlight are soldered in the same place as pins from EL foil, don't forget to solder them, too. And when you try to switch on the instrument for checking, better don't touch these contacts, there's high voltage. Daniel Forro
Show quoted textHide quoted text
On 10 Jun, 2013, at 11:01 AM, charlie midi gfa wrote: > thanks looking > is all thats required if the backlight is "spotty" is a new elpanel ? > > when is a invertor needed? > > charlie
Re: [CZ-VZ-Files] backlights
2013-06-10 by charlie midi gfa
back lights , smoke machine high voltage ,,feedback!!!!!!! perfect ............................................. r 'n' r dude !!!! thanks let you know how things pan out charlie ----- Original Message -----
Show quoted textHide quoted text
From: "Daniel Forró" <dan.for@...> To: <CZ-VZ-Files@yahoogroups.com> Sent: Sunday, June 09, 2013 10:38 PM Subject: Re: [CZ-VZ-Files] backlights > Inverter is necessary for EL foil, so it is there somewhere inside the > machine - near the PSU or near the display, you can see two wires > going to the display for backlight. > > Just change EL panel carefully (because sometimes the old one is > little bit glued inside, use long thin knife or cutter carefully, but > never tried to open display as you will misallign contacts), solder > new one (shortly! not to burn laminate), that's all. If wires for the > backlight are soldered in the same place as pins from EL foil, don't > forget to solder them, too. And when you try to switch on the > instrument for checking, better don't touch these contacts, there's > high voltage. > > Daniel Forro > > On 10 Jun, 2013, at 11:01 AM, charlie midi gfa wrote: > >> thanks looking >> is all thats required if the backlight is "spotty" is a new elpanel ? >> >> when is a invertor needed? >> >> charlie > > > > ------------------------------------ > > Yahoo! Groups Links > > > >