Casio CZ/ VZ/ FZ - Pro Series

Hi Steve! Many thanks for the infos! 

I just tried to send that VZcard09, but still getting the same message
( Load Error / Check system ! ). 
I don´t have used "deBug". (is this a freeware application?). So i am
not sure about the midichanel within the datafile.

here is what i did (used MidiOx):
02 MEM PROTECT - INTERNAL OFF
04 MIDI CHANNEL -  I set it to "1"
05 MIDI DATA - ECLUSIVE enabled
03 LOAD - LOAD/SAVE > MIDI > [data type] > YES, YES

As soon MidiOx starts to send the sysexdata, the VZ-10m gives me that
error....

is there anything i am doing wrong?

phono





--- In CZsynth@yahoogroups.com, "steve_the_composer" <smw-mail@p...>
wrote:
> --- In CZsynth@yahoogroups.com, "phonophobie" <sidstation@h...> wrote:
> > Last night i tried to send sysex banks from midiOX to my VZ10m too.
> > I was getting an ERROR message all the time. ( vz said something
> > about midi error/ Check system ).
> 
> Here are the error messages I have been getting when sending VZ sysex 
> data to the VZ-8m. (See my previous message about channel and data 
> type matching.)
> ---------------------------------------------------------------
> Message: --TRANS ERROR--- | CHECK SYSTEM!
> Problem: Data channel <> VZ receive channel
> Solution: Change VZ channel to match sysex file data.
> 
> Message: --MIDI ERROR--- | RECEIVE ERROR
> Problem: Data type transmitted <> Data type expected
> Solution: Select proper data type when loading data type into VZ.
> ---------------------------------------------------------------
> To see the channel and size of data, you can use debug [PC].
> 
> EXAMPLE [VZCard9.syx]:
> F0 44 03 00 70 70 02 F7
> F0 = system exclusive data coming
> 44 = Casio product ID
> 03 = VZ line
> 00 = VZ-1 format data [02 = VZ-8m format data]
> 70 = channel 1 [7N where N = 0->F meaningchannels 1->16]
> 70 = open communication
> 02 = INT 64 voices + 64 op-mems
> F7 = end of sysex transmission.
> 
> F0 44 03 00 70 74 . . . [data] . . . F7
> 74 = data is coming next
> 
> other codes for the 6th byte:
> 71 = close
> 72 = ok
> 73 = error
> ---------------------------------------------------------------
> For the VZ-8m, I have the following SYSEX data sizes [received from 
> VZ]:
> 
> 65661 = FULL [Voice + Op-Men + Total]
> 65644 = VC+OP [Voice + Op-Mem]
> 43094 = VOICE
> 22672 = OPMEM
> 
> The VZ files posted in files are 55958 which I assume is the VZ-1/VZ-
> 10M VC+OP size.
> ---------------------------------------------------------------
> Hope this helps.
> --Steve