Casio CZ/ VZ/ FZ - Pro Series

OK.  I finally got it to work on XP.  I had MidiOX 7.0 receiving, but 
nothing would make it send to the VZ--even though everything looked 
correct. It seems my interface had partially locked up--perhaps 
because I had several midi programs loaded at the same time.

SO, I rebooted the computer and the interface.  This time, I ran ONLY 
MidiOx.  I was able to send the files directly to the VZ via MidiOx.  
Try this.

BTW, what computer/OS and interface are you using?  Is there anything 
else in your set up which might be affecting the data flow?

With MidiOx, under MIDI Devices, the only ports I selected were the 
in and outs for the port connected to the VZ.
For port routings, I have MIDI-OX Event Port going directly to the 
port with the VZ.

I have sent vz.syx files successfully to the VZ with midiox about a 
dozen times.

Hope this helps.
--Steve

--- In CZsynth@yahoogroups.com, "phonophobie" <sidstation@h...> wrote:
> just tried it out again - no success! maybe it´s something else?
i
> guess i will check this all on a win98 pc, soon
> 
> 
> 
> 
> --- In CZsynth@yahoogroups.com, "zog2zog2003" <sandersp1@j...> 
wrote:
> > I set the Midi Ox sysex buffer size to 128 and the number of them 
to 
> > 2.  ( Under "view" get up the sysex window, then under sysex 
> > it's "options" )
> > 
> > My sysex patch files load to the VZ with those settings.  
Apparently 
> > if you get "buffer full" errors, restarting Midi-Ox clears the 
buffer 
> > and you get fewer probs.  I started getting good transfers at 2 
> > buffers of 32, then tried a few with larger buffers.  Of course 
some 
> > other settings may also work.
> > 
> > Somebody already mentioned you should have the VZ's memory-
protect 
> > disabled, and the Menu-3 settings usually = "Load","Midi" 
> > and "VC+OP", and have activated the "Execute" line before 
> > transmitting the sysex file from Midi-Ox.
> > 
> > 
> > Pete