Casio CZ/ VZ/ FZ - Pro Series

----- Original Message ----- 
From: "Scott Nordlund" <gsn10@...>
To: <CZsynth@yahoogroups.com>
Sent: Tuesday, March 21, 2006 10:53 PM
Subject: RE: [CZsynth] CZ-1000 modifications...?


> >However, recently the power jack has been acting a bit tempermental;
>>it's a little touchy now. Not good. I was wondering if anybody else had
>>similar problems, and if so, what had they done?

    Hi.  I used to have this problem with my CZ1000 all the time!  I dragged 
it out a while ago, and I couldn't get it to work, only made strange buzzing 
sounds when powered on.  I used to have to slightly wiggle the power connect 
to get a good connection or else the power light would start to blink and 
shut off after 10 seconds or so.  I've also run in to the same problem with 
other synth's as well.   If you can get to it, see if there's a way to 
resolder the connection on the circuit board where the power jack is 
located.  Hope this helps.