Casio CZ/ VZ/ FZ - Pro Series

Hola David, yo estoy en Cordoba y te cuento que al CZ-3000 no lo consegui en ML, se lo compre a un personaje que lo habia usado para girar con una banda de cuarteto (asi que te imaginaras el estado en el que llego a mis manos: una tecla partida y parchada, quemadas de puchos en el chassis, faltaban botones etc etc) pero lo pague solo 240 pesitos! Ya le reemplace todos los switches y el pote de volumen y quedo joya en ese aspecto (50p en repuestos), pero sigo luchando con el problema de la distorsion en las salidas, a la tecla partida la consigo en un service oficial que hay acá, pero me quieren atar 50 pesitos solo por la tecla! Imaginate para repararle ese problema de las salidas...por eso queria ver si con la ayuda de la gente del foro lo puedo solucionar yo (ademas tengo algunos conocimientos de electronica), por eso subi el manual de servicio del 5000 (que es el 3000 mas secuencer) a ver si alguien se le ocurre algo, vamos a ver si lo saco andando 100% pronto, saludos!!!!

--- In CZsynth@yahoogroups.com, David Mochen <davidmochen@...> wrote:
>
> Hi there!
> 
> Leandro, yo también estoy en Argentina. Felicitaciones y suerte con tu 
> CZ. Imagino que lo habrás comprado por MercadoLibre. Yo estaba muy 
> encaprichado con pegar un CZ-1 desde hace años... tuve mucha suerte y 
> compré uno por ML a 950 pesos en junio de 2010, me lo mandaron de 
> Neuquén, en excelente estado!
> 
> Es cuestión de buscar, esperar... aunque, claro, CZ-1 hay pocos.
> 
> Cualquier cosa, a tus órdenes.
> 
> Saludos!
> 
> David
> 
> On 03/02/2011 12:36, Leandro wrote:
> >
> > Thanks for the input guys, I was thinking about using the CZ-5000´s 
> > values, since the 3000 it is really a 5000 minus the sequencer...
> > Steve: Not really, until now it has been quite a deal, here in my 
> > country a working condition CZ-3000 in my country sells at aprox. 1400 
> > pesos (U$S350), I have spent U$S 60 on the 3000, plus U$S 15 on the 
> > touch switches and faders. The replacement work was done by myself 
> > since I can handle the soldering iron pretty well( a bit tedious work, 
> > each switch has 4 solder points, so I had desoldered/soldered like 500 
> > times!!!). Regarding the CZ-5000 service manual, it is nearly 45Mb. 
> > It´s ok to upload such big files to the group´s file section?
> >
> > --- In CZsynth@yahoogroups.com <mailto:CZsynth%40yahoogroups.com>, 
> > "steve_the_composer" <smw-mail@> wrote:
> > >
> > > I agree with Simon. I know that the CZ-3000 responds to CZ-5000 
> > sequencer memory dumps and it has the capacity to store sequencer 
> > dumps as well. Based on that I just assumed that the CZ-3000 was a 
> > CZ-5000 without the sequencer interface.
> > >
> > > Out of curiotity, I am wondering how much you are spending to 
> > service the CZ-3000. It sounds like you are spending more money to 
> > recondition the CZ-3000 than it would be to have gotten one in working 
> > condition.
> > >
> > > Also, could you upload the CZ-5000 Service manual to the files 
> > section? I would be interested in seeing that.
> > >
> > > Thanks.
> > >
> > > Steve
> > >
> > >
> > > --- In CZsynth@yahoogroups.com <mailto:CZsynth%40yahoogroups.com>, 
> > "Simon Beck" <simon@> wrote:
> > > >
> > > > Considering that the 3000 and the 5000 are sister models 
> > (identical apart from the 5000's sequencer) and were released at the 
> > same time, I suspect that the 5000's parameters are more likely to 
> > match those of the 3000. The CZ-1 was launched a couple of years later 
> > and while it featured an upgraded version of the same architecture, I 
> > doubt that the electronics are quite as similar.
> > > >
> > > > Simon
> > >
> >
> > 
> 
> 
> [Non-text portions of this message have been removed]
>