Casio CZ/ VZ/ FZ - Pro Series

okay messages are still delayed ?
sent friday i think 
and this one is sent sunday at 10:30pm

chaz


----- Original Message ----- 
From: "charlie midi gfa" <charles.copp@...>
To: <CZsynth@yahoogroups.com>
Sent: Saturday, December 01, 2012 7:56 PM
Subject: Re: [CZsynth] Are the CZ-3000/5000 velocity sensitive?


> fz has similar engine as cz and is velo senctive ..a.T   too!
> if you don't need controller than try for a fz or vz as matter of fact
> 
> cz-1 only  gm entry level synt,,other have no velo or a.t.
> 
> chaz
> 
> 
> 
> ----- Original Message ----- 
> From: "Jason Adkins" <jason_ralf808@...>
> To: <CZsynth@yahoogroups.com>
> Sent: Saturday, December 01, 2012 7:36 PM
> Subject: Re: [CZsynth] Are the CZ-3000/5000 velocity sensitive?
> 
> 
>> Sorry I think your correct,its a long time since I used an CZ3000/5000  
>> I just assumed it could be,I was using it as a controller too because  
>> I  never had money at the time I just would have thought it would have  
>> responded to velocity over midi but I sold them before I actually got  
>> a velocity sensitive keyboard to try them out.
>> 
>> 
>> On 1 Dec 2012, at 23:10, 350ypvs@... wrote:
>> 
>>> As far as I'm aware, only the CZ-1 is velocity sensitive. None of  
>>> the other
>>> CZ's to my knowledge are velocity/ after-touch sensitive, even via  
>>> MIDI.
>>>
>>> All models bar the CZ101/ 1000/ 230S are 8 voice/ 16 DCO synths. The  
>>> 101/
>>> 1000/ 230S are 4 voice/ 8 DCO (or 8 voice with just a single DCO  
>>> line).
>>>
>>> CZ-1's come up occasionally but seem to be one of the rarest of the CZ
>>> models. 101/ 1000/ 3000/ 5000 are more plentiful.
>>>
>>> Hope this helps!
>>>
>>> Chas
>>>
>>> On 1 December 2012 20:22, mz82003 <mz82003@...> wrote:
>>>
>>>> **
>>>>
>>>>
>>>> Hi,
>>>>
>>>> I'm new to the CZ community and I'm currentmly on the search of an  
>>>> 8-voice
>>>> 16-DCO CZ synth.
>>>>
>>>> I know the CZ-1 is the only one in the family whith a keyboard that  
>>>> can
>>>> generate velocity and AT, but I'm wondering:
>>>>
>>>> Are the CZ-3000/5000 velocity sensitive, i.e. can they be  
>>>> programmed to
>>>> respond to velocity when used with a sequencer or a master kb?
>>>>
>>>> Thanks.
>>>>
>>>>
>>>>
>>>
>>>
>>> [Non-text portions of this message have been removed]
>>>
>>>
>>>
>>> ------------------------------------
>>>
>>> Yahoo! Groups Links
>>>
>>>
>>>
>> 
>> 
>> 
>> ------------------------------------
>> 
>> Yahoo! Groups Links
>> 
>> 
>> 
>>
> 
> 
> ------------------------------------
> 
> Yahoo! Groups Links
> 
> 
> 
>