If the selector is not soldered and doesn't require to take everything apart just to access it I should manage to do it. In any case, if nothing bad happens, I'll let you know how it works!
Jérôme
"Loscha loscha@gmail.com [CZsynth]" <CZsynth@yahoogroups.com> a écrit :
Hi Daniel,
I think I got an hardcopy of the service manual so I'll take a look at it. I don't really know how to read schematics but I should be able to figure out.
I'll have time to look at it tomorrow and I'll let you know how it went. If I can find it I'll take pictures of where it's located to post it somewhere because I couldn't find much about this online...
Thanks & have a nice one,
Jérôme
"Daniel Forró danforcz@yahoo.com [CZsynth]" <CZsynth@yahoogroups.com> a écrit :
According to freely downloadable Service Manual (not the best quality)
this instrument has universal transformer with voltage selector in
primary circuit. Voltage selector is in the list of parts, so it must
be somewhere. That means no soldering or reconnecting cables is
necessary.
Because such selector is not described in Owner's Manual, it's inside
the machine, somewhere in PSU circuit near the transformer.
During changing the voltage pull AC cord from the mains. Good luck.
Anyway I don't think you can destroy it even when connected - Canada
has 120 V, Europe 220 V. It will just not work.
Daniel Forro
On Aug 31, 2015, at 7:12 PM, Jérôme jeromestpierre@riseup.net
[CZsynth] wrote:
> Hi all,
>
> I just brought back in Canada a CZ-1 I bought in Europe and I trying
> to figure out what must be done to use it here with an adapted line
> chord without frying the board.
>
> I guess it should be ready to be adjusted for different voltage
> specifications or else it wouldn't be very handy for touring
> musicians.
>
> The owner manual, under power supply, is refering to: 100V, 120V,
> 220V, 240V AC. And then there is this warning: CHANGING THE VOLTAGE
> SELECTOR MAY REQUIRE THE USE OF A DIFFERENT LINE CORD OR ATTACHMENT
> PLUG, OR BOTH. TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, REFER
> SERVICING TO QUALIFIED SERVICE PERSONNEL GUIDELINES LAID DOWN BY FCC
> RULES FOR USE OF THE UNIT IN THE U.S.A. (not applicable to other
> areas).
>
> Does anyone knows where is this voltage selector? Is it refering to
> an internal switch or it's a soldered part that must be changed?
>
> Thanks a lot for your help!
>
> Jérôme