ComputerVoltageSources

About time I got the frac panel .fpd out and finished?  What is the
current consensus about what needs to be put on the panel?

Thanks to all for giving their time/knowledge to this project.

On 6/7/06, Grant Richter <grichter@...> wrote:
> OK, we had to iron out some issues.
>
> Nathan from Basic Micro supplied us with the info we needed for precessor module pin
> assignments.
>
> John Loffink pointed out that the attenuated inputs could be calibrated, that eliminates
> eight extra jacks. Dave Brown reccomended moving new feature control to an I2C port
> expander. That allows the CVS to be backwards software compatible with the PSIM.
> Brilliant ideas.
>
> We have a consensus on the basic design. Both 5 volt 1/4" systems and 10 volt 1/8"
> systems will be supported by using different resistor values on assembly. There is going to
> be a "port" for people to add there own perf board built input circuits with the features of
> software programable gain and offset for inputs. That gives an option for people who need
> both 5 and 10 volt ranges at different times.
>
> Hopefully, Harry will have the time soon to do the actual PC board layout.
>
> The project is still very much alive.
>
> Much thanks to Dave Brown, John Loffink and Harry Bissel for enthusiasm and all of the
> really smart ideas. Also for having a good sense of humor for probably misspelling their
> names.
>
>
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>