Dave Smith Instruments SYNTHESIZERS

Sayer, you said, "The Evolver does not seem to change the sequence 
with the patches even though the Seq Lock is set to off."

The Evolver saves sequence data in each patch (a.k.a program).  With 
the "Lock Seq" function set to OFF, the Evolver operates normally, 
and (assuming a given patch contains sequence data - realize that not 
all of them do) it will play each patch's sequence as you would 
expect.  Turning "Lock Seq" ON simply prevents the loading of new 
sequence data as you change patches, and essentially gives you a way 
to hear the same sequence played with many different sounds.  You can 
also use this trick as a means to copy sequence data from one patch 
to another.

Unless the Evolver - the one that you don't have, of course - has a 
problem, this is how it should operate.


Ski
www.ex5tech.com
EX5Tech Evolver forum:
http://www.ex5tech.com/ex5ubb_cgi/ultimatebb.cgi?ubb=forum&f=23


--- In DSI_Evolver@yahoogroups.com, "Sayer" <Sayer@S...> wrote:
> --- In DSI_Evolver@yahoogroups.com, "ski_ex5tech" <ex5tech@e...> 
> wrote:
> > Sayer - There is no internal "factory reset" feature to restore 
the 
> > presets.  However, the factory presets are available in both 
SysEx 
> > and MIDI formats, and it is quite easy and quick to load them 
into 
> > the Evolver.  The following thread at EX5Tech explains how to do 
it 
> > with SysEx files:
> > 
> > Using MIDI-OX to Save & Load Evolver Patches 
> > http://www.ex5tech.com/ex5ubb_cgi/ultimatebb.cgi?
> > ubb=get_topic&f=23&t=000013
> > 
> > (Note:  If your email client or the Yahoo group splits the link 
> above 
> > onto two lines, you may need to copy/paste the link into your 
> browser 
> > address bar.)
> 
> Thanks! The evolver does not seem to change the sequence with the 
> patches even though the Seq Lock is set to off. 
> 
> Not that I have an Evolver or anything.... I'm just curious. :)
> 
> Sayer