Dave Smith Instruments SYNTHESIZERS

Hey, don't apologize for asking!  ;)  I don't have Logic, and haven't 
even tried driving my Evolver from an external sequencer yet, so I 
may not be much help.  However...

I pretty confident that the Trigger Select (Row 7, Knob 7) function 
is NOT going to solve your problem.  Trigger Select only specifies 
whether MIDI and/or the internal sequencer trigger the Evolver 
envelopes.  That's not your issue.

I think you need to do one of two things:

1) Prevent Logic from sending the "sequencer start" message (sorry, 
but I can't help you with that one - you'll have to hit the Logic 
manual).

2) Try changing the Evolver "MIDI Clock" (Row 1, Knob 8) to either 
OFF or OUt.  This might prevent the internal sequencer from running 
as a result of messages received from Logic.

Hope one of those two things works for you.


Ski
www.ex5tech.com
EX5Tech Evolver forum:
http://www.ex5tech.com/ex5ubb_cgi/ultimatebb.cgi?ubb=forum&f=23


--- In DSI_Evolver@yahoogroups.com, graeme <doghead61@y...> wrote:
> 
> Hi guys, just when i thought i was reaching some kinda familiarity 
with me weebluebeastie i ran into a (prolly easy to solve) problem.
> 
> basically, when playing patches via midisequencer (Logic4.8) - even 
tho there is not a sequence programmed for that sound, the (DSE) 
sequencer cranks up and plays when playing back a (L4.8) sequence 
from the pooter.
> 
> I thought i had the trigger settings etc sussed out but am 
obviously missing summat here - how do i turn off a sequence, and, if 
the patch has no sequence programmend for it (it's a preset) what 
sequence is actually playing, does the sequene form the last patch 
somehow carry over...
> 
> sorry for the rambling incompetence of this post but sometimes you 
just get stuck and gotta ask......
> 
> Graeme
> 
> 
> 
> ---------------------------------
> Do you Yahoo!?
> The New Yahoo! Search - Faster. Easier. Bingo.