Dave Smith Instruments SYNTHESIZERS

Sorry that didn't work for you, Simon.  I've done it several times 
with v1.6, and it works for me.  I'm not sure what we could be doing 
differently.  

If you haven't already done so, I'd highly recommend that you drop 
Dave an email regarding the matter.  I'm sure he'd be interested to 
hear about it, and he may be able to provide an update or workaround 
that addresses your concerns.


Ski
www.ex5tech.com
EX5Tech Evolver forum:
http://www.ex5tech.com/ex5ubb_cgi/ultimatebb.cgi?ubb=forum&f=23


--- In DSI_Evolver@yahoogroups.com, simon leclerc <Simonvolt@v...> 
wrote:
> "I find it easiest to change the tempo back by tweaking the BPM
> setting by a notch and then back again."
> 
> That does not work Ski. I tried it yesterday and just
> now, and you only have 2 choices if you happen to run
> over CLO and want to get back to the original tempo:
> set all steps to 40 or do a program reset.
> If you didnt save your program
> before running over CLO,  you will waste precious
> time for nothing.  I worked a couples hours with
> 1.6 yesterday and i found this behavior extremely
> annoying and time consuming.
> 
> I really think  a reset to the orignal tempo should be
> done once you have left the CLO destination.
> 
> on 30/09/03 2:38 AM, ski_ex5tech at ex5tech@e... wrote:
> 
> My sincere apologies, Simon, I misunderstood.
> 
> Yes, you're right.  If you set a sequencer destination to Clock Mod
> (even if just "running over it") while running the sequencer, it 
WILL
> change the tempo of the sequence to something other than the BPM
> setting, unless all sequencer steps are set to 40.  That's what it's
> supposed to do though, of course.  It changes the tempo, and the
> tempo won't change back until you DO something to change the tempo.
> I find it easiest to change the tempo back by tweaking the BPM
> setting by a notch and then back again.  Maybe Dave could program 
the
> Reset to do this, too.
> 
> 
> Ski
> www.ex5tech.com
> EX5Tech Evolver forum:
> http://www.ex5tech.com/ex5ubb_cgi/ultimatebb.cgi?ubb=forum&f=23
> 
> 
> --- In DSI_Evolver@yahoogroups.com, simon leclerc <Simonvolt@v...>
> wrote:
> > 1.6 does not resolve what i'm describing below.
> > diS / CLO are now seperated, but if run over
> > CLO it changes all clock settings and the only way
> > to get it back is to manually put all steps
> > to 40 or do a program reset.
> > 
> > 
> > on 29/09/03 11:54 PM, ski_ex5tech at ex5tech@e... wrote:
> > 
> > As already posted to the group and to EX5Tech, OS beta 1.6 solves
> > this problem.  Check the posts from the past couple days, or go
> > download beta 1.6 for yourself to give it a try.
> > 
> > 
> > Ski
> > www.ex5tech.com
> > EX5Tech Evolver forum:
> > http://www.ex5tech.com/ex5ubb_cgi/ultimatebb.cgi?ubb=forum&f=23
> > 
> > --- In DSI_Evolver@yahoogroups.com, "Simon " <Simonvolt@v...> 
wrote:
> > > Just a note: 
> > > I think  modulating the clock is great (diS is great too :))
> > > but like i mentionned in OS 1.5, everytime you run over the
> > > CLO destination, your original clock settings get screwed.  You
> > > either have to manually set all steps to 40 or start over and
> reset
> > > the program.
> > > Would it be possible to get back to the previous clock settings
> > > when leaving CLO ?
> > > Cause you'll see that it can be really anoying to reach for diS
> but
> > > accidentally run over CLO and scew up your program.
> > > 
> > > Simon
> > 
> > 
> > Yahoo! Groups Sponsor   ADVERTISEMENT
> >  
> > To unsubscribe from this group, send an email to:
> > DSI_Evolver-unsubscribe@yahoogroups.com
> > 
> > 
> > 
> > Your use of Yahoo! Groups is subject to the Yahoo! Terms of 
Service
> > <http://docs.yahoo.com/info/terms/> .
> 
> 
> Yahoo! Groups Sponsor   ADVERTISEMENT
>  
> To unsubscribe from this group, send an email to:
> DSI_Evolver-unsubscribe@yahoogroups.com
> 
> 
> 
> Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
> <http://docs.yahoo.com/info/terms/> .