Dave Smith Instruments SYNTHESIZERS

It's done.  :)  Check the beta page on Dave's site for PIC version 
1.8.

Thanks to Sayer for the heads up!


Ski
www.ex5tech.com
EX5Tech Evolver forum:
http://www.ex5tech.com/ex5ubb_cgi/ultimatebb.cgi?ubb=forum&f=23


--- In DSI_Evolver@yahoogroups.com, simon leclerc <Simonvolt@v...> 
wrote:
> Ok, thanks Ravi. 
> A reset with shift would be great.
> 
> on 30/09/03 6:07 PM, Ravi Ivan Sharma at noision1@h... wrote:
> 
> I have already raised this issue with dave. I think he is working on
> a reset by pressing the reset button. I also passed on the idea to
> have the CLO at the end of the list . . .  don't know if he will buy
> that though . . 
> 
> Ravi
> 
> p.s. Dave is looking for some patches utilizing the new O.S.
> features. If you have some good ones, send them to him by tomorrow.
> 
> 
> 
> 
> --- In DSI_Evolver@yahoogroups.com, simon leclerc <Simonvolt@v...>
> wrote:
> > Ski, it's my turn to offer you my sincere apologies.
> > I was tweaking the *Clock Divide* by a notch
> > instead of the *BPM* knob. I just tried your trick with  the BPM
> > knob and it works fine...pheewww, i was starting
> > to wonder if there was something wrong with
> > my little Evilver :D
> > 
> > I still think the reset idea when leaving CLO
> > would be best,  should i email DAVE or will he
> > hear about it thru this forum (or you) ?
> > 
> > Thanks for your help,
> > 
> > Simon
> > 
> > on 30/09/03 10:57 AM, ski_ex5tech at ex5tech@e... wrote:
> > 
> > Sorry that didn't work for you, Simon.  I've done it several times
> > with v1.6, and it works for me.  I'm not sure what we could be
> doing
> > differently.  
> > 
> > If you haven't already done so, I'd highly recommend that you drop
> > Dave an email regarding the matter.  I'm sure he'd be interested 
to
> > hear about it, and he may be able to provide an update or
> workaround
> > that addresses your concerns.
> > 
> > 
> > Ski
> > www.ex5tech.com
> > EX5Tech Evolver forum:
> > http://www.ex5tech.com/ex5ubb_cgi/ultimatebb.cgi?ubb=forum&f=23
> > 
> > 
> > --- In DSI_Evolver@yahoogroups.com, simon leclerc <Simonvolt@v...>
> > wrote:
> > > "I find it easiest to change the tempo back by tweaking the BPM
> > > setting by a notch and then back again."
> > > 
> > > That does not work Ski. I tried it yesterday and just
> > > now, and you only have 2 choices if you happen to run
> > > over CLO and want to get back to the original tempo:
> > > set all steps to 40 or do a program reset.
> > > If you didnt save your program
> > > before running over CLO,  you will waste precious
> > > time for nothing.  I worked a couples hours with
> > > 1.6 yesterday and i found this behavior extremely
> > > annoying and time consuming.
> > > 
> > > I really think  a reset to the orignal tempo should be
> > > done once you have left the CLO destination.
> > > 
> > > on 30/09/03 2:38 AM, ski_ex5tech at ex5tech@e... wrote:
> > > 
> > > My sincere apologies, Simon, I misunderstood.
> > > 
> > > Yes, you're right.  If you set a sequencer destination to Clock
> Mod
> > > (even if just "running over it") while running the sequencer, it
> > WILL
> > > change the tempo of the sequence to something other than the BPM
> > > setting, unless all sequencer steps are set to 40.  That's what
> it's
> > > supposed to do though, of course.  It changes the tempo, and the
> > > tempo won't change back until you DO something to change the
> tempo.
> > > I find it easiest to change the tempo back by tweaking the BPM
> > > setting by a notch and then back again.  Maybe Dave could 
program
> > the
> > > Reset to do this, too.
> > > 
> > > 
> > > Ski
> > > www.ex5tech.com
> > > EX5Tech Evolver forum:
> > > http://www.ex5tech.com/ex5ubb_cgi/ultimatebb.cgi?ubb=forum&f=23
> > > 
> > > 
> > > --- In DSI_Evolver@yahoogroups.com, simon leclerc
> <Simonvolt@v...>
> > > wrote:
> > > > 1.6 does not resolve what i'm describing below.
> > > > diS / CLO are now seperated, but if run over
> > > > CLO it changes all clock settings and the only way
> > > > to get it back is to manually put all steps
> > > > to 40 or do a program reset.
> > > > 
> > > > 
> > > > on 29/09/03 11:54 PM, ski_ex5tech at ex5tech@e... wrote:
> > > > 
> > > > As already posted to the group and to EX5Tech, OS beta 1.6
> solves
> > > > this problem.  Check the posts from the past couple days, or 
go
> > > > download beta 1.6 for yourself to give it a try.
> > > > 
> > > > 
> > > > Ski
> > > > www.ex5tech.com
> > > > EX5Tech Evolver forum:
> > > > http://www.ex5tech.com/ex5ubb_cgi/ultimatebb.cgi?
ubb=forum&f=23
> > > > 
> > > > --- In DSI_Evolver@yahoogroups.com, "Simon " <Simonvolt@v...>
> > wrote:
> > > > > Just a note:
> > > > > I think  modulating the clock is great (diS is great too :))
> > > > > but like i mentionned in OS 1.5, everytime you run over the
> > > > > CLO destination, your original clock settings get screwed.
> You
> > > > > either have to manually set all steps to 40 or start over 
and
> > > reset
> > > > > the program.
> > > > > Would it be possible to get back to the previous clock
> settings
> > > > > when leaving CLO ?
> > > > > Cause you'll see that it can be really anoying to reach for
> diS
> > > but
> > > > > accidentally run over CLO and scew up your program.
> > > > > 
> > > > > Simon
> > > > 
> > > > 
> > > > Yahoo! Groups Sponsor   ADVERTISEMENT
> > > >  
> > > > To unsubscribe from this group, send an email to:
> > > > DSI_Evolver-unsubscribe@yahoogroups.com
> > > > 
> > > > 
> > > > 
> > > > Your use of Yahoo! Groups is subject to the Yahoo! Terms of
> > Service
> > > > <http://docs.yahoo.com/info/terms/> .
> > > 
> > > 
> > > Yahoo! Groups Sponsor   ADVERTISEMENT
> > >  
> > > To unsubscribe from this group, send an email to:
> > > DSI_Evolver-unsubscribe@yahoogroups.com
> > > 
> > > 
> > > 
> > > Your use of Yahoo! Groups is subject to the Yahoo! Terms of
> Service
> > > <http://docs.yahoo.com/info/terms/> .
> > 
> > 
> > Yahoo! Groups Sponsor
> > To unsubscribe from this group, send an email to:
> > DSI_Evolver-unsubscribe@yahoogroups.com
> > 
> > 
> > 
> > Your use of Yahoo! Groups is subject to the Yahoo! Terms of 
Service
> > <http://docs.yahoo.com/info/terms/> .
> 
> 
> Yahoo! Groups Sponsor   ADVERTISEMENT
>  
> To unsubscribe from this group, send an email to:
> DSI_Evolver-unsubscribe@yahoogroups.com
> 
> 
> 
> Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
> <http://docs.yahoo.com/info/terms/> .