Dave Smith Instruments SYNTHESIZERS

On Tue, Nov 25, 2003 at 04:31:19PM -0800, Craig Wiper wrote:
>    I'm  using  Midi-Ox  and  everytime I try and load the first PIC file,
>    halfway  through  the  load I get an error message telling me that the
>    port  is transmitting data to the device, wait until the data has been
>    transmitted, and then try again.

I don't really understand that error message.  It makes it sound like
you were trying to do some utility in MIDI-OX while it was transmitting.

Anyway, I would suggest the following:
1) transmit directly into the Evolver via MIDI
2) don't run any MIDI back into your PC
3) open Sysex view in MIDI-OX and load the file
4) then right click and select "send" (or select form the drop-down menu)
5) a window will pop up and will start counting the number
   of bytes transmitted; the Evo will also start its counting
6) only when the window has disappeared and the Evo has rebooted should
   you try to do anything else

If that doesn't work, please detail your setup a bit more and
when/where/how it gives you the error messages.
	 
Good luck!
Joe