Dave Smith Instruments SYNTHESIZERS

Congrats, James :)

----- Original Message ----- 
From: "Carbon111" <carbon111@...>
To: <DSI_Evolver@yahoogroups.com>
Sent: Saturday, May 14, 2005 4:15 AM
Subject: [Evolver] Finally...


> ...its here!!!!
>
> I just received my DSI Polyevolver and its sweet!
>
> One little niggle though...when I got it, I noticed that whoever had
> assembled it had neglected to remove the manufacturer's scratchguard off
> of the face of the LCD...it was wavy, bubbled and wrinkled but, of
> course, it was behind the Lexan faceplate! Besides being annoying, it
> actually hindered the display's visibility.
> To remove it I had to disassemble the Evolver:
> 1) remove screws and pull off top plate
> 2) unplug all ribbon cables
> 3) unscrew and remove main board
> Now I finally had access to the display board...
> 4) remove display board screws and spacers
> 5) carefully pop display off of the sticky side of the Lexan
> 6) peel off offending crap
> 7) do all the above steps backwards...eep!
>
> Okay, two niggles...The knobs wouldn't stay on after about ten minutes
> of use so I wedged one layer of tissue paper between the flat side of
> the pot shaft and the knob bodies.
>
> Okay, that being said you guys must think I'm going to say it sucks?
> NO WAY. This thing ROCKS!
> It has that "Prophet" roughness that I love in my P600 but can almost be
>  as polite as my Nord modular or as *whacked* as my Serge depending on
> the patch. For a moment I thought it was broken as I started to demo it,
> the patches were so rough! Then I started to suss that there were realms
> of subtlety available as well. This is VERY flexible!
> Four voices are more than enough for now - this thing is FAT!
> I LOVE IT!!!
> Its not just that this synth is a "keeper" for my studio, its *unique* !
> Expect it to be prominent in my next few songs.
>
> Thanks Dave!
>
> BTW - Hi everybody!
>
> Best Regards, James
> --
> http://www.carbon111.com
>
>
>
>
> --------------------------------------------------------------------------------
> Yahoo! Groups Links
>
>  a.. To visit your group on the web, go to:
>  http://groups.yahoo.com/group/DSI_Evolver/
>
>  b.. To unsubscribe from this group, send an email to:
>  DSI_Evolver-unsubscribe@yahoogroups.com
>
>  c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
>
>