Dave Smith Instruments SYNTHESIZERS

You don't tell us what output level you are using., which is the most 
important thing.  If you have it set at 100 that will explain it. The evo 
has a lot of volume and distorts easily. I normally run the output at no 
more than 39, if you still have clipping at this level I'd suspect a fault

Richard

----- Original Message ----- 
From: "colpaertpeter" <therealcolpaertpeter@...>
To: <DSI_Evolver@yahoogroups.com>
Sent: Wednesday, June 22, 2005 12:13 PM
Subject: [Evolver] Strange overload fx-input


> Hello
>
> Here's another newbie and proud owner of a evolver.Just now,I've
> started using my evolver as a fx-unit.Very nice,BUT.....I work with
> an
> audio patchbay before all my audio signals go into my mixer.So when I
> divert my audio from my soundcart (echo 24) straight into my
> evolver,the sound clips all the time,even if I put my input gain as
> low
> as possible,also my input volume.So i have a clipped sound.When I use
> my send function from my mixing table,I can adjust so it doesn't clip
> or just a little.Is this normal??
> Also,and this is with all my presets,whenever I give a little
> distortion
> it directly overdrives (pre- and post filter).i can go from 0 to 1 or
> to 2 distortion level,but if I go to level 3 it makes an big jump in
> distortion level,going from level 3 till 99 doesn't make much
> difference .Does annybody has an explanation for this?Any help would
> be
> welcome.
>
> Thanx in advance
> Peter
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
>
>