Dave Smith Instruments SYNTHESIZERS

Okay got it!

I needed to activate the keyboard setting in the editor. It always
these littlest thing...

Thanks  

--- In DSI_Evolver@yahoogroups.com, "Stefan Trippler" <doct@o...> wrote:
>
> > My routing: Evo In/out: Midex 1 in/out, Novation Remote set as
> > "keyboard" under midi settings in the ST editor.  Thats it
> 
> That's my setting too.
> Works perfectly.
> 
> ----- Original Message ----- 
> From: "altitude909" <altitude@o...>
> To: <DSI_Evolver@yahoogroups.com>
> Sent: Wednesday, November 30, 2005 10:34 PM
> Subject: [Evolver] Re: Soundtower Update
> 
> 
> > Sounds like your routing may be at issue.  I use the 3.0 software with
> > my Remote 25 and the CC's work perfectly (in fact I am using the
> > template offered here).
> > 
> > My routing: Evo In/out: Midex 1 in/out, Novation Remote set as
> > "keyboard" under midi settings in the ST editor.  Thats it
> > 
> > -alt
> > 
> > --- In DSI_Evolver@yahoogroups.com, "rickyannotta" <rickyannotta@y...>
> > wrote:
> >>
> >> 
> >> Stephan - thanks for your insight.
> >> The thing is, if the editor is responding to Evolver's front panel 
> >> (in realtime), then "echo'd" cc#'s should logically be working. 
> >> HHMmmmm...
> >>        
> >> The great thing about the Remote is not only does Midi(2x)/USB work 
> >> at the same time, but you have lots of control over *where* midi 
> >> data is routed as well for each I/O. Well thought out gear, but 
> >> things can get confusing too...I will check a few things tonight 
> >> with a fine tooth comb.
> >> 
> >> 
> >> --- In DSI_Evolver@yahoogroups.com, "Stefan Trippler" <doct@o...> 
> >> wrote:
> >> >
> >> > Rick, the controller thing works for me, values in the editor are 
> >> updated as 
> >> > well as in the Evolver if I turn knobs on my BCR2000.
> >> > 
> >> > Maybe the problem is in your midi chain. Are you sure that the 
> >> Remote send 
> >> > the controllers to both Midi Out and USB at a time ? If yes the 
> >> problem may 
> >> > also be in the editor.
> >> > I can imagine that the editor might not exploit middi CCs 
> >> directly, but 
> >> > reacts on the echoed Sysex data from the Evolver. In this case 
> >> your setup 
> >> > wouldn't work.
> >> > 
> >> > Regards
> >> > Stefan
> >> > 
> >> > ----- Original Message ----- 
> >> > From: "rickyannotta" <rickyannotta@y...>
> >> > To: <DSI_Evolver@yahoogroups.com>
> >> > Sent: Wednesday, November 30, 2005 5:41 PM
> >> > Subject: [Evolver] Re: Soundtower Update
> >> > 
> >> > 
> >> > > Okay - contacted soundtower...wait & see what happens. In the
> >> > > meantime if anyone has tested the editor responding to CC#'s
> >> > > automatically let me know. I would love to start programming with
> >> > > the editor via my Novation Remote for cetain things (sliders work
> >> > > better for envelope's than knobs).
> >> > >
> >> > > Here's my routing:
> >> > > Evolver Midi Out > Remote Midi In #1 > Remote USB Out > Editor In
> >> > > Editor Out > Remote USB In > Remote Midi Out #1 > Evolver Midi
> >> > > in
> >> > >
> >> > >
> >> > > --- In DSI_Evolver@yahoogroups.com, "rickyannotta"
> >> > > <rickyannotta@y...> wrote:
> >> > >>
> >> > >>
> >> > >> Just installed the 3.0 update and I can't get the editor to 
> >> update
> >> > > CC#
> >> > >> parameters in realtime (for ex. I turn a knob on my controller
> >> > >> assigned to a CC#, the Evo responds, but the editor does not
> >> > > respond).
> >> > >>  Just wondering if anyone tried before I contacted soundtower.
> >> > >>
> >> > >> Thanks
> >> > >>
> >> > >> Rick
> >> > >>
> >> > >
> >> > >
> >> > >
> >> > >
> >> > >
> >> > >
> >> > >
> >> > >
> >> > > Yahoo! Groups Links
> >> > >
> >> > >
> >> > >
> >> > >
> >> > >
> >> > >
> >> > >
> >> >
> >>
> > 
> > 
> > 
> > 
> > 
> > 
> > 
> > 
> > Yahoo! Groups Links
> > 
> > 
> > 
> > 
> > 
> > 
> > 
> >
>