Played around with the new version last night. I feel I have hands
on control of this beast for the first time! Whether I decide to
edit from the Remote, the Evo or the editor everything works
together for the first time. Turning knobs & sliders on the Remote
and having it update on the screen in realtime is *very* nice. The
Remote template posted here is excellent BTW.
One last wish for the Soundtower. The editor does not seem to
follow program/bank changes made from the Evo or the midi
controller, only from within the editor itself. It's a small gripe,
but would be a *nice* finishing touch. No more mousing and such just
to change a bank/program.
Thanks
Rick
--- In DSI_Evolver@yahoogroups.com, "altitude909" <altitude@o...>
wrote:
>
> Sounds like your routing may be at issue. I use the 3.0 software
with
> my Remote 25 and the CC's work perfectly (in fact I am using the
> template offered here).
>
> My routing: Evo In/out: Midex 1 in/out, Novation Remote set as
> "keyboard" under midi settings in the ST editor. Thats it
>
> -alt
>
> --- In DSI_Evolver@yahoogroups.com, "rickyannotta"
<rickyannotta@y...>
> wrote:
> >
> >
> > Stephan - thanks for your insight.
> > The thing is, if the editor is responding to Evolver's front
panel
> > (in realtime), then "echo'd" cc#'s should logically be working.
> > HHMmmmm...
> >
> > The great thing about the Remote is not only does Midi(2x)/USB
work
> > at the same time, but you have lots of control over *where* midi
> > data is routed as well for each I/O. Well thought out gear, but
> > things can get confusing too...I will check a few things tonight
> > with a fine tooth comb.
> >
> >
> > --- In DSI_Evolver@yahoogroups.com, "Stefan Trippler"
<doct@o...>
> > wrote:
> > >
> > > Rick, the controller thing works for me, values in the editor
are
> > updated as
> > > well as in the Evolver if I turn knobs on my BCR2000.
> > >
> > > Maybe the problem is in your midi chain. Are you sure that the
> > Remote send
> > > the controllers to both Midi Out and USB at a time ? If yes
the
> > problem may
> > > also be in the editor.
> > > I can imagine that the editor might not exploit middi CCs
> > directly, but
> > > reacts on the echoed Sysex data from the Evolver. In this case
> > your setup
> > > wouldn't work.
> > >
> > > Regards
> > > Stefan
> > >
> > > ----- Original Message -----
> > > From: "rickyannotta" <rickyannotta@y...>
> > > To: <DSI_Evolver@yahoogroups.com>
> > > Sent: Wednesday, November 30, 2005 5:41 PM
> > > Subject: [Evolver] Re: Soundtower Update
> > >
> > >
> > > > Okay - contacted soundtower...wait & see what happens. In the
> > > > meantime if anyone has tested the editor responding to CC#'s
> > > > automatically let me know. I would love to start programming
with
> > > > the editor via my Novation Remote for cetain things (sliders
work
> > > > better for envelope's than knobs).
> > > >
> > > > Here's my routing:
> > > > Evolver Midi Out > Remote Midi In #1 > Remote USB Out >
Editor In
> > > > Editor Out > Remote USB In > Remote Midi Out #1 > Evolver
Midi
> > > > in
> > > >
> > > >
> > > > --- In DSI_Evolver@yahoogroups.com, "rickyannotta"
> > > > <rickyannotta@y...> wrote:
> > > >>
> > > >>
> > > >> Just installed the 3.0 update and I can't get the editor to
> > update
> > > > CC#
> > > >> parameters in realtime (for ex. I turn a knob on my
controller
> > > >> assigned to a CC#, the Evo responds, but the editor does not
> > > > respond).
> > > >> Just wondering if anyone tried before I contacted
soundtower.
Show quoted textHide quoted text
> > > >>
> > > >> Thanks
> > > >>
> > > >> Rick
> > > >>
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > Yahoo! Groups Links
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > >
> >
>
