Dave Smith Instruments SYNTHESIZERS

Stephan - thanks for your insight.
The thing is, if the editor is responding to Evolver's front panel 
(in realtime), then "echo'd" cc#'s should logically be working. 
HHMmmmm...
       
The great thing about the Remote is not only does Midi(2x)/USB work 
at the same time, but you have lots of control over *where* midi 
data is routed as well for each I/O. Well thought out gear, but 
things can get confusing too...I will check a few things tonight 
with a fine tooth comb.


--- In DSI_Evolver@yahoogroups.com, "Stefan Trippler" <doct@o...> 
wrote:
>
> Rick, the controller thing works for me, values in the editor are 
updated as 
> well as in the Evolver if I turn knobs on my BCR2000.
> 
> Maybe the problem is in your midi chain. Are you sure that the 
Remote send 
> the controllers to both Midi Out and USB at a time ? If yes the 
problem may 
> also be in the editor.
> I can imagine that the editor might not exploit middi CCs 
directly, but 
> reacts on the echoed Sysex data from the Evolver. In this case 
your setup 
> wouldn't work.
> 
> Regards
> Stefan
> 
> ----- Original Message ----- 
> From: "rickyannotta" <rickyannotta@y...>
> To: <DSI_Evolver@yahoogroups.com>
> Sent: Wednesday, November 30, 2005 5:41 PM
> Subject: [Evolver] Re: Soundtower Update
> 
> 
> > Okay - contacted soundtower...wait & see what happens. In the
> > meantime if anyone has tested the editor responding to CC#'s
> > automatically let me know. I would love to start programming with
> > the editor via my Novation Remote for cetain things (sliders work
> > better for envelope's than knobs).
> >
> > Here's my routing:
> > Evolver Midi Out > Remote Midi In #1 > Remote USB Out > Editor In
> > Editor Out > Remote USB In > Remote Midi Out #1 > Evolver Midi
> > in
> >
> >
> > --- In DSI_Evolver@yahoogroups.com, "rickyannotta"
> > <rickyannotta@y...> wrote:
> >>
> >>
> >> Just installed the 3.0 update and I can't get the editor to 
update
> > CC#
> >> parameters in realtime (for ex. I turn a knob on my controller
> >> assigned to a CC#, the Evo responds, but the editor does not
> > respond).
> >>  Just wondering if anyone tried before I contacted soundtower.
> >>
> >> Thanks
> >>
> >> Rick
> >>
> >
> >
> >
> >
> >
> >
> >
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
> >
> >
>