Dave Smith Instruments SYNTHESIZERS

Sounds like your routing may be at issue.  I use the 3.0 software with
my Remote 25 and the CC's work perfectly (in fact I am using the
template offered here).

My routing: Evo In/out: Midex 1 in/out, Novation Remote set as
"keyboard" under midi settings in the ST editor.  Thats it

-alt

--- In DSI_Evolver@yahoogroups.com, "rickyannotta" <rickyannotta@y...>
wrote:
>
> 
> Stephan - thanks for your insight.
> The thing is, if the editor is responding to Evolver's front panel 
> (in realtime), then "echo'd" cc#'s should logically be working. 
> HHMmmmm...
>        
> The great thing about the Remote is not only does Midi(2x)/USB work 
> at the same time, but you have lots of control over *where* midi 
> data is routed as well for each I/O. Well thought out gear, but 
> things can get confusing too...I will check a few things tonight 
> with a fine tooth comb.
> 
> 
> --- In DSI_Evolver@yahoogroups.com, "Stefan Trippler" <doct@o...> 
> wrote:
> >
> > Rick, the controller thing works for me, values in the editor are 
> updated as 
> > well as in the Evolver if I turn knobs on my BCR2000.
> > 
> > Maybe the problem is in your midi chain. Are you sure that the 
> Remote send 
> > the controllers to both Midi Out and USB at a time ? If yes the 
> problem may 
> > also be in the editor.
> > I can imagine that the editor might not exploit middi CCs 
> directly, but 
> > reacts on the echoed Sysex data from the Evolver. In this case 
> your setup 
> > wouldn't work.
> > 
> > Regards
> > Stefan
> > 
> > ----- Original Message ----- 
> > From: "rickyannotta" <rickyannotta@y...>
> > To: <DSI_Evolver@yahoogroups.com>
> > Sent: Wednesday, November 30, 2005 5:41 PM
> > Subject: [Evolver] Re: Soundtower Update
> > 
> > 
> > > Okay - contacted soundtower...wait & see what happens. In the
> > > meantime if anyone has tested the editor responding to CC#'s
> > > automatically let me know. I would love to start programming with
> > > the editor via my Novation Remote for cetain things (sliders work
> > > better for envelope's than knobs).
> > >
> > > Here's my routing:
> > > Evolver Midi Out > Remote Midi In #1 > Remote USB Out > Editor In
> > > Editor Out > Remote USB In > Remote Midi Out #1 > Evolver Midi
> > > in
> > >
> > >
> > > --- In DSI_Evolver@yahoogroups.com, "rickyannotta"
> > > <rickyannotta@y...> wrote:
> > >>
> > >>
> > >> Just installed the 3.0 update and I can't get the editor to 
> update
> > > CC#
> > >> parameters in realtime (for ex. I turn a knob on my controller
> > >> assigned to a CC#, the Evo responds, but the editor does not
> > > respond).
> > >>  Just wondering if anyone tried before I contacted soundtower.
> > >>
> > >> Thanks
> > >>
> > >> Rick
> > >>
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > > Yahoo! Groups Links
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> >
>