Dave Smith Instruments SYNTHESIZERS

> Ok, So is it possible to send start stop info via midi from Protools
> to the PEK while still using the PEKs internal clock?

If the clock is set to internal the Evolver won't react on sequencer 
start/stop messages. If you set a patch to trigger select "midi gates 
sequencer/reset", the Evolver will start if a note is sent from Pro Tools.

As alwaysm, unsyncronizeded midi devices will have slightly differnt clock 
speeds and be out of sync after a few bars, so it is useful to retrigger the 
Evo sequencer often by sending new notes each or each 2nd bar.

Stefan

----- Original Message ----- 
From: "Paul Love" <paul10love@...>
To: <DSI_Evolver@yahoogroups.com>
Sent: Saturday, May 06, 2006 5:06 PM
Subject: Re: [Evolver] PEK Clockmod & slaving?


> Ok, So is it possible to send start stop info via midi from Protools
> to the PEK while still using the PEKs internal clock? This way I
> could retain the clockmod values of my sequence while still having
> the sequencer of the PEK start at the same time as my Drum Machine. I
> do this sometimes with my Machinedrum and it works great.  I  do not
> know how to go about doing this with the PEK? Please let me know if
> this could be a possible solution?
> On May 6, 2006, at 7:15 AM, Stefan Trippler wrote:
>
>> Currently sequencer clock modulation combined with external clock
>> doesn't
>> work. I don't know if it were possible at all.
>>
>> Stefan
>>
>> ----- Original Message -----
>> From: "Paul love" <paul10love@...>
>> To: <DSI_Evolver@yahoogroups.com>
>> Sent: Saturday, May 06, 2006 4:05 PM
>> Subject: [Evolver] PEK Clockmod & slaving?
>>
>>
>> > Forgive me if this topic has been beaten before. I have a
>> sequence in my
>> > PEK using sequence
>> > four to generate variable clockmod values to the sequence. I am
>> wanting to
>> > slave my PEK to
>> > Protools so when I hit play in Protools the PEk sequencer and
>> drum machine
>> > sequencer starts
>> > at the same. So I go into globals and change from the internal
>> clock of
>> > the Pek to midi in. At
>> > this point the PEK syncs and follows Protools tempo but
>> completely gone is
>> > my clockmod to
>> > the Pek sequence so all I am getting is a stream of  steady 8th
>> notes with
>> > no variations from
>> > the clockmod. I am probably doing something stupid but would
>> really like
>> > to find a way to
>> > make this work! Any suggestions or solutions are welcome. Thanks
>> to all!
>> > Best regards, Paul
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>> > Yahoo! Groups Links
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>>
>>
>>
>> SPONSORED LINKS
>> Music sampler Sampler Electronic
>>
>> YAHOO! GROUPS LINKS
>>
>>  Visit your group "DSI_Evolver" on the web.
>>
>>  To unsubscribe from this group, send an email to:
>>  DSI_Evolver-unsubscribe@yahoogroups.com
>>
>>  Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
>>
>>
>
>