Ok gang, I am about to ruin your Evolver. I read this post: http://www.vintagesynth.com/forum/viewtopic.php?f=1&t=49602&start=0&hilit=dco+pop ...and I said, "No this is ridiculous, I have had an Evolver for 4+ years. I've never heard this." So I got home, dialed up a simple patch. It's true, it's there, and now that I've heard it, I can't STOP hearing it. To repro: Create a simple patch using the ANALOG oscillators - one or two. Make sure the envelopes have short attacks. Play enough low notes that you cycle all the voices your evolver setup has on the low note - one note should be sufficient for standard MONO setups, 4 for standard POLYs. So, tap a low C 1-4 times. Now start to tap some high notes - an octave or two above middle C. Listen. What you will hear is that each voice that transitions from a low note to a high note will produce an audible "clopping" - a wide-frequency glitch/click as each voice goes from the low note to the high note. Apparently it can't be fixed. The digital oscillators don't have this issue.
Message
Evolver DCO popping
2009-07-11 by Anu Kirk
Attachments
- No local attachments were found for this message.