Dave Smith Instruments SYNTHESIZERS group photo

Yahoo Groups archive

Dave Smith Instruments SYNTHESIZERS

Index last updated: 2026-04-28 22:43 UTC

Message

Re: [Evolver] Keyboard mode select does nothing

2003-02-16 by Ravi Ivan Sharma

I am unclear from your post. Are you saying that if you hit a note, you hear it, then if you take your finger off, then hit another note, you hear nothing? If so, that is very wrong.
On the other hand, if you are saying that if you hold down note one and press a second key you don't hear the second note take over and cut out the first even if you have LAST NOTE chosen, then that is wierd too. Perhaps make sure you don't have a silent sequence going on . . OR make sure you midi set up is not causing problems, ie. try the evolver with midi in only just in case you are setting up a midi loop.
Ravi
----- Original Message -----
From: mr_rock
Sent: Sunday, February 16, 2003 11:00 AM
Subject: Re: [Evolver] Keyboard mode select does nothing


I could live with Last Note. What it's doing is First Note - which
is more than slightly annoying. Makes my CS-15 more 'playable' at the
moment - not better - just more playable. :)

Off I go to fiddle with it a bit more...

Regards,
Gary

--- In DSI_Evolver@yahoogroups.com, Paul Nagle <paul@s...> wrote:
> On Sun, 16 Feb 2003 13:15:37 -0000, "mr_rock <;mr_rock@c...>"
> wrote:
>
> >Hi All,
> >
> >Does anyone else have a problem with the keyboard mode select? No
> >matter what setting I choose - low note, high note, last note with
or
> >without retrig - my Evolver responds only to the first key pressed
> >;and ignores the rest.
>
> Personally I only use Last Note as I found the touch response of the
> others all to be slightly "odd"... I kept meaning to really spend
time
> working it all out but, well, I haven't... 8)
>
> Paul



To unsubscribe from this group, send an email to:
DSI_Evolver-unsubscribe@yahoogroups.com



Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Attachments

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.