Dave Smith Instruments SYNTHESIZERS

Today I noticed a weird problem with my Evolver. There's a constant noise in
the rythm of the amp envelope that stays even if I turn all oscillators off:
http://www.trippler.net/files/mp3/evoprob.mp3
The mp3 starts with ringmodulator and a sync osc, which both are turned
down.
The noise sounds like a saw osc playing with constant pitch, it is not
tunable regardless which osc pitch I change, is not influenced by the master
tune value, doesn't react on midi note number though the oscillators do, and
gets louder if I increase the VCA level (audible near the end of the demo
mp3).
I am sure that there is no modulation in the program that can cause this, it
happens even in an initialized patch.

Someone knows what's wrong here ?

Regards
Stefan

no idea. but check every modulation again... is this sound on every
patch ?




 --- In DSI_Evolver@yahoogroups.com, trippler@t... wrote:
> Today I noticed a weird problem with my Evolver. There's a constant
noise in
> the rythm of the amp envelope that stays even if I turn all
oscillators off:
> http://www.trippler.net/files/mp3/evoprob.mp3
> The mp3 starts with ringmodulator and a sync osc, which both are turned
> down.
> The noise sounds like a saw osc playing with constant pitch, it is not
> tunable regardless which osc pitch I change, is not influenced by
the master
> tune value, doesn't react on midi note number though the oscillators
do, and
> gets louder if I increase the VCA level (audible near the end of the
demo
> mp3).
> I am sure that there is no modulation in the program that can cause
this, it

> happens even in an initialized patch.
> 
> Someone knows what's wrong here ?
> 
> Regards
> Stefan

Hi,

Is the Noise Volume parameter level set to zero? I have encountered a
similar situation, and I discovered that the constant noise was just that.

 - Fletcher


--- In DSI_Evolver@yahoogroups.com, trippler@t... wrote:
> Today I noticed a weird problem with my Evolver. There's a constant
noise in
> the rythm of the amp envelope that stays even if I turn all
oscillators off:
> http://www.trippler.net/files/mp3/evoprob.mp3
> The mp3 starts with ringmodulator and a sync osc, which both are turned
> down.
> The noise sounds like a saw osc playing with constant pitch, it is not
> tunable regardless which osc pitch I change, is not influenced by
the master
> tune value, doesn't react on midi note number though the oscillators
do, and
> gets louder if I increase the VCA level (audible near the end of the
demo
> mp3).
> I am sure that there is no modulation in the program that can cause
this, it

> happens even in an initialized patch.
> 
> Someone knows what's wrong here ?
> 
> Regards
> Stefan

Yah, but on every patch? 

> -----Original Message-----
> From: radiognome3 [mailto:fletcher@...] 
> Sent: Monday, May 17, 2004 7:14 AM
> To: DSI_Evolver@yahoogroups.com
> Subject: [Evolver] Re: weird problem
> 
> Hi,
> 
> Is the Noise Volume parameter level set to zero? I have 
> encountered a similar situation, and I discovered that the 
> constant noise was just that.
>