Dave Smith Instruments SYNTHESIZERS

high all,
did anyone have success to use behringer bcr 2000 learning mode with 
evolver. i tried it, but the parameter range i got was different from 
original evolver ones, sometimes parameters jump values, did i miss 
something ? has someone allready made a evolver preset for bcr 2000 ?

At 20:37 2005-06-12, you wrote:
>high all,
>did anyone have success to use behringer bcr 2000 learning mode with
>evolver. i tried it, but the parameter range i got was different from
>original evolver ones, sometimes parameters jump values, did i miss
>something ? has someone allready made a evolver preset for bcr 2000 ?

I might be wrong here, but I don't think that the BCR2000 can handle sysex 
sufficiently to work with the Evolver...

/Christian

Christian Andersson wrote:
> At 20:37 2005-06-12, you wrote:
> 
>>high all,
>>did anyone have success to use behringer bcr 2000 learning mode with
>>evolver. i tried it, but the parameter range i got was different from
>>original evolver ones, sometimes parameters jump values, did i miss
>>something ? has someone allready made a evolver preset for bcr 2000 ?
> 
> 
> I might be wrong here, but I don't think that the BCR2000 can handle sysex 
> sufficiently to work with the Evolver...
> 
> /Christian 
>

Yah,  the edirol devices don't either.  I spent a lot of time working it 
out and learned a lot about SYSEX,  only to find out that the Edirol 
doesn't support the format that the Evolver wants the parameter settings 
  to be communicated as (ie.  1 - 126,  or 1 - 164 ).

the evolver wants the parameter setting number to be something like follows

[ Sysex Begin ]

sysex info
..
..
..
[Parameter setting]
xxxx 0000  (nibble, Least Significant)
xxxx 0000  (nibble, most significant)
..
..
sysex info

[End Sysex]


This is roughly the format, I may have those reversed,  can't remember 
off hand,  but I know that the parameter is actually parts of 2 seperate 
bytes.  The last 4 bits (or a nibble) of 2 different bytes to be exact....

If there's a manual for me to peruse about programming the BCR for 
sysex,  I'll take a look and see if it is capable, but I think I recall 
it wasn't.   Do an archive search off of the yahoo group page and see if 
you find something.

--- In DSI_Evolver@yahoogroups.com, Christian Andersson <synth_christian@h...> wrote:

> I might be wrong here, but I don't think that the BCR2000 can handle sysex 
> sufficiently to work with the Evolver...

Check this out...

Dave is almost finished with a new rev of software for the Evo (and the rack, too) - it'll now 
accept a bunch of cc's...not all parameters are addressable, but over 50 will be, including 
the ones most people probably reach for the most often.

I'll let you guys know when it's up on the DSI wweb site.  Should be very soon.

dB
DSI

Dave wrote:
> --- In DSI_Evolver@yahoogroups.com, Christian Andersson <synth_christian@h...> wrote:
> 
> 
>>I might be wrong here, but I don't think that the BCR2000 can handle sysex 
>>sufficiently to work with the Evolver...
> 
> 
> Check this out...
> 
> Dave is almost finished with a new rev of software for the Evo (and the rack, too) - it'll now 
> accept a bunch of cc's...not all parameters are addressable, but over 50 will be, including 
> the ones most people probably reach for the most often.
> 
> I'll let you guys know when it's up on the DSI wweb site.  Should be very soon.
> 
> dB
> DSI


Oh wow!  That's great!  I guess it's true if you wish hard enough, 
things can come true!  :)

Dave listens to his customers, that is f-ing great news. With that I think 
we can say the evolver is finished, a done deal - a properly classic synth!

Richard

----- Original Message ----- 

From: "Dave" <musicdave9@...>
To: <DSI_Evolver@yahoogroups.com>
Sent: Tuesday, June 14, 2005 1:19 AM
Subject: Re: [Evolver] bcr 2000 with evolver


> --- In DSI_Evolver@yahoogroups.com, Christian Andersson 
> <synth_christian@h...> wrote:
>
>> I might be wrong here, but I don't think that the BCR2000 can handle 
>> sysex
>> sufficiently to work with the Evolver...
>
> Check this out...
>
> Dave is almost finished with a new rev of software for the Evo (and the 
> rack, too) - it'll now
> accept a bunch of cc's...not all parameters are addressable, but over 50 
> will be, including
> the ones most people probably reach for the most often.
>
> I'll let you guys know when it's up on the DSI wweb site.  Should be very 
> soon.
>
> dB
> DSI
>
>
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
>