Dave Smith Instruments SYNTHESIZERS

Hi everyone - just wondering if anyone has the sysex codes in Hex for
parameter control on the poly - the manual only has the binary, and it
is a pain for me. If not, can anyone direct me to a site which can do
the conversions quickly?

Also I've been trying to send cc messages for a couple of things that
the poly is supposed to recognise - (i think i was trying to send bank
select control change) but the manual is confusing as to how you do
this - can someone give me an example? what control messages do you
have to send for a bank change for example?

Program Parameters

If this message is received while in Combo mode, only the Parts with
MIDI enabled will respond to the change.

 Status     Description
 ------  ---------------------------
   F0    System Exclusive (SysEx)
   01    DSI ID
   20    Evolver ID
   01    File Version
   01    Program Parameter
   vv    Parameter Number 0 - 127. Parameters are in the same order as
         Evolver.  The Parameter data starts on page 66.
   0v    Parameter value, LS Nibble
   0v    Parameter value, MS Nibble
   F7    End of Exclusive (EOX)


    Sequencer Parameters

 Status     Description
 ------  ---------------------------
   F0    System Exclusive (SysEx)
   01    DSI ID
   20    Evolver ID
   01    File Version
   08    Sequence Parameter
   vv    Sequence step 0-63. 0-15 are sequence 1 steps, 16-31 for
         sequence 2 etc.
   0v    Step value, LS Nibble
   0v    Step value, MS Nibble
   F7    End of Exclusive (EOX)


   Combo Parameters

This message is ignored if the synth is in Program mode

 Status     Description
 ------  ---------------------------
   F0    System Exclusive (SysEx)
   01    DSI ID
   20    Evolver ID
   01    File Version
   2A    Combo Parameter
   vv    Combo Parameter number 0  79. See table on page 64.
   0v    Parameter value, LS Nibble
   0v    Parameter value, MS Nibble
   F7    End of Exclusive (EOX)


   Global Parameters

 Status     Description
 ------  ---------------------------
   F0    System Exclusive (SysEx)
   01    DSI ID
   20    Evolver ID
   01    File Version
   09    Global Parameter
   0v    Global Parameter Number 0-17. Global Parameters are listed
         starting on page 62. Note that some parameter numbers are not
         used; this is to maintain compatibility with Evolvers.
   0v    Parameter value, LS Nibble
   0v    Parameter value, MS Nibble
   F7    End of Exclusive (EOX)


-miles
-- 
Do not taunt Happy Fun Ball.

thanks heaps!

--- In DSI_Evolver@yahoogroups.com, Miles Bader <miles@g...> wrote:

> 
>     Program Parameters
> 
> If this message is received while in Combo mode, only the Parts with
> MIDI enabled will respond to the change.
> 
>  Status     Description
>  ------  ---------------------------
>    F0    System Exclusive (SysEx)
>    01    DSI ID
>    20    Evolver ID
>    01    File Version
>    01    Program Parameter
>    vv    Parameter Number 0 - 127. Parameters are in the same order as
>          Evolver.  The Parameter data starts on page 66.
>    0v    Parameter value, LS Nibble
>    0v    Parameter value, MS Nibble
>    F7    End of Exclusive (EOX)
> 
> 
>     Sequencer Parameters
> 
>  Status     Description
>  ------  ---------------------------
>    F0    System Exclusive (SysEx)
>    01    DSI ID
>    20    Evolver ID
>    01    File Version
>    08    Sequence Parameter
>    vv    Sequence step 0-63. 0-15 are sequence 1 steps, 16-31 for
>          sequence 2 etc.
>    0v    Step value, LS Nibble
>    0v    Step value, MS Nibble
>    F7    End of Exclusive (EOX)
> 
> 
>    Combo Parameters
> 
> This message is ignored if the synth is in Program mode
> 
>  Status     Description
>  ------  ---------------------------
>    F0    System Exclusive (SysEx)
>    01    DSI ID
>    20    Evolver ID
>    01    File Version
>    2A    Combo Parameter
>    vv    Combo Parameter number 0  79. See table on page 64.
>    0v    Parameter value, LS Nibble
>    0v    Parameter value, MS Nibble
>    F7    End of Exclusive (EOX)
> 
> 
>    Global Parameters
> 
>  Status     Description
>  ------  ---------------------------
>    F0    System Exclusive (SysEx)
>    01    DSI ID
>    20    Evolver ID
>    01    File Version
>    09    Global Parameter
>    0v    Global Parameter Number 0-17. Global Parameters are listed
>          starting on page 62. Note that some parameter numbers are not
>          used; this is to maintain compatibility with Evolvers.
>    0v    Parameter value, LS Nibble
>    0v    Parameter value, MS Nibble
>    F7    End of Exclusive (EOX)
> 
> 
> -miles
> -- 
> Do not taunt Happy Fun Ball.

gigolo_heidi wrote:
> thanks heaps!
> 
> --- In DSI_Evolver@yahoogroups.com, Miles Bader <miles@g...> wrote:

In the future,  you can use the calculator in windows.  Switch it to 
Scientific mode.  It will convert binary to hex and vice versa.