Mono Eolver Upgrade problem
2005-08-22 by Miguel Mendoza
Hello, I had a big problem with the 3.0 update, I'm
going to explain the steps I followed:
I updated the OS via the Evolver editor, I think
that this was the main reason of the problem but I checked the version after
this and it was 3.0. After the SO update the Evolver sound was mainly a big
noise, I suppoused that this will change when I replace the eprom and I did it
but the noise was still there for all the programs, sometimes changed the
intensity, sometimes there was sound only from one channel. So I though that the
best thing I could do was to undo the update, and I replaced the eprom with the
old one (2.1) and tried to upload the 2.0 SO with the Evolver editor again. At
this step the lights of the sequencer started to blink and the Evolver seemed
not to work, then I reseted and the light of the display never came back, it
looks like it's completly dead, I don't know if I have to install again the 3.0
eprom and try, still didn't do it mainly because I don't know what SO version I
have installed.
Any idea?
Thanks.