Yamaha DTXpress/DTXplorer/DTXtreme group photo

Yahoo Groups archive

Yamaha DTXpress/DTXplorer/DTXtreme

Index last updated: 2026-04-28 22:44 UTC

Message

RE: [DTXpress] Adding TP120S to DTX3SP while keeping TP65S

2004-09-22 by rdamon@mckinney-usa.com

Charles,
 
The TP120S and TP65S must be plugged into inputs 2, 6 or 7 to use all three
zones.
 
The PCY130s can work on inputs 1-8, which means you can use it for your
hihat pad as well, though you may need some more felt washers to tighten
down to minimize movement.
 
Moving the TP65 tom to input 9 or 10 is also fine.
 
It think you are going to love the TP120S!
 
Good Luck.
 
OGD
 

 " From: Charles Baer Sent: Wednesday, September 22, 2004 12:48 PM
To: DTXpress@yahoogroups.com
Subject: [DTXpress] Adding TP120S to DTX3SP while keeping TP65S



From the documentation available, it seems I can move a tom pad to input
9/10, the PC130S to the ex-tom jack, and the TP65S to the ex-cymbal jack.
The single, dual and triple outputs of the pads in question will still 
be on inputs
that support their full function while opening up the snare input for 
the TP120S.
That or just put the TP120S into the newly open cymbal input...plus the 
whole
theory rides on 2,6,7 being interchangeable on the programming side.

Now all I need to find is a timbale mapping that supports rim shots one 
one edge
and cascara on the other.  I can't see one in either of the two manuals, 
is there no
such sound in the DTX3 ?

Charlie " 


 
**************************************************************************
The information transmitted herewith is sensitive information intended only
for use to the individual or entity to which it is addressed. If the reader
of this message is not the intended recipient, you are hereby notified that
any review, retransmission, dissemination, distribution, copying or other
use of, or taking of any action in reliance upon, this information is
strictly prohibited. If you have received this communication in error,
please contact the sender and delete the material from your computer.


______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email 
______________________________________________________________________

Attachments

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.