Yamaha DTXpress/DTXplorer/DTXtreme

OGD

Well, no luck....

Using the stereo cables that came with the set.
I have only about 1 inch between the down and up position so its not too
high on rod
Opened up the unit saw the rubber rocker and everything looks OK, then
reassembled
Same results...
Also did factory reset and then put triggers back to MED SP.

Are there any other checks I can do?  Anything I need to double check in the
module?

Also noticed your monster kit in the pics.  What are the small round
triggers (looks like 5 or 6 inch diameter) you have mounted between your
cymbals?

Todd


> 
> You have already done the first thing I would have suggested. The
> second is to check to make sure you are using two stereo cables to
> connect it to the module. Third, make sure that it is not adjusted
> too high on the rod. If the heavy metal clutch that moves up and down
> that is attached to the center rod doesn't make contact with the
> rubber rocker in the bottom of the RHH130 pad, it will always stay
> opened up. Fourth, only if you feel comfortable opening it up, is to
> see if anything has gotten between the rubber rocker and the ribbon
> switch in the bottom of the pad.
> 
> OGD
> 
> --- In DTXpress@yahoogroups.com, "electricmusic" <thcmusic@c...>
> wrote:
>> > 
>> > I have just set up my new DTXPRESSIII SP and everything seems to
> work quite well ...
>> > except for the RHH130.
>> > 
>> > Shouldn't I be able to hear a difference in the sounds when hitting
> the hi hat with the pedal
>> > pressed down (closed hi hat) and the pedal up (open high hat).  It
> always sounds like it is
>> > in the open position.  I have tried various kits and results are
> the same.
>> > 
>> > When I press the pedal down I do get the close hit.
>> > 
>> > If, what steps should I take to troubleshoot the Hi Hat.  It seems
> like a controller issue?  I
>> > am already using the Normal (MED) trigger setup for the SP kit.  I
> have also checked the
>> > wiring.
>> > 
>> > Any other suggestions or clarification would be appreciated.
>> > 
>> > Todd
> 
> 
> 
> 
> 
> Community email addresses:
>   Post message: DTXpress@yahoogroups.com
>   Subscribe:    DTXpress-subscribe@yahoogroups.com
>   Unsubscribe:  DTXpress-unsubscribe@yahoogroups.com
>   List owner:   DTXpress-owner@yahoogroups.com
> 
> Shortcut URL to this page:
>   http://groups.yahoo.com/group/DTXpress
> 
> Alternate DTXpress site:
>   http://www.dtxpressions.com
> 
> 
> Yahoo! Groups Sponsor
>  
>  ADVERTISEMENT
>  
> <http://us.ard.yahoo.com/SIG=129b1uquq/M=298184.6191685.7192823.3001176/D=grpl
> ch/S=1705031972:HM/EXP=1111719715/A=2593423/R=0/SIG=11el9gslf/*http://www.netf
> lix.com/Default?mqso=60190075>
> 
> 
> Yahoo! Groups Links
> * To visit your group on the web, go to:
> * http://groups.yahoo.com/group/DTXpress/
> *  
> * To unsubscribe from this group, send an email to:
> * DTXpress-unsubscribe@yahoogroups.com
> <mailto:DTXpress-unsubscribe@yahoogroups.com?subject=Unsubscribe>
> *  
> * Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
> <http://docs.yahoo.com/info/terms/> .
>