Yamaha DTXpress/DTXplorer/DTXtreme

one other quick thing, i went to the trigger edit, went to dt 10/20 and then what do i save that two, the lowest number is 8 and i thought it was the snare input which is 2.

emf <liberatusvirus@...> wrote:
--- In DTXpress@yahoogroups.com, frank celauro <fjcelauro@y...> wrote:
> hey ed, i think my pintech will be hear this morning, do i need a 
mono cable or will the cable from the three zone snare work?  also, 
how do i adjust it and just what do i need to change?  about ed at 
drumbalaya, im sure he is the man, but i didnt follow him in terms of 
terminology and i told him that and he said he would try to speak 
english and i still didnt get him.  being that i am a drummer of over 
a decade, i was a little bewildered that he couldnt connect with me 
in lay terms.

Frank,

The original cable will work fine. You'll need to set another pad 
type in the Trigger Menu--as memory serves either DT10/20 or RHP 
snare. Find the "Input Attenuation" (badly named) DIPs on the back of 
the module between the MIDI in/out jacks and the top row of input 
jacks. Flip the one corresponding to input 2 to the "H" position, to 
increase the mesh's signal. You'll need a pin or a small screwdriver 
unless your fingernail can do the trick. Feel free to experiment with 
other trigger settings yourself, but don't get carried away.  If you 
stray too far and can't get back, you'll have to do a factory reset 
and lose your user kits. (You can save your data beforehand to your 
PC via DTXchange if you're so inclined). As I said, you may find that 
the Pintech runs very hot through the module. 

Ed





Community email addresses:
  Post message: DTXpress@yahoogroups.com
  Subscribe:    DTXpress-subscribe@yahoogroups.com
  Unsubscribe:  DTXpress-unsubscribe@yahoogroups.com
  List owner:   DTXpress-owner@yahoogroups.com

Shortcut URL to this page:
  http://groups.yahoo.com/group/DTXpress

Alternate DTXpress site:
  http://www.dtxpressions.com 



---------------------------------
Yahoo! Groups Links

   To visit your group on the web, go to:
http://groups.yahoo.com/group/DTXpress/
  
   To unsubscribe from this group, send an email to:
DTXpress-unsubscribe@yahoogroups.com
  
   Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. 



__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com