Yamaha DTXpress/DTXplorer/DTXtreme

My bad, I overlooked input 9/10!! Where does everyone get there 
extra pads? I saw some on dtxperience.com, anyone use them?


--- In DTXpress@yahoogroups.com, "Damon, Rob" <rdamon@m...> wrote:
> Alan,
>  
> I assume when you say you have no free inputs, is because you have 
a
> Dtxpress III special?
>  
> If this is the case you only have one free input no. 10 that is 
shared
> with your Crash2 cymbal in input 9/10. 
>  
> This doesn't mean that you can only add a mono zone pad like a 
PCY130.
> IF you are willing to move pads around and use only custom kits, 
you can
> reconfigure the kit so that you could add another PCY150S stereo 
three
> zone pad.
>  
> If you are handy with electronics, you could make a DTXpander box 
that
> would let you use the unused rim zones on inputs 1,3,4,5 but there 
are
> limitations. 
>  
> The third choice is locate a trigger to midi box, like the TMC-6 
from
> Roland, that would let you plug in up to 6 mono zone trigger pads 
and
> then run a midi cable from the TMC-6 to the Midi jack on the back 
of the
> Dtxpress module and use it to trigger sounds that are inside the 
module.
>  
> The fourth choice is to add a used second module.
>  
> That should give you a few options to consider.
>  
> OGD
> 
> ________________________________
> 
> From: DTXpress@yahoogroups.com [mailto:DTXpress@yahoogroups.com] On
> Behalf Of Alan Ault
> Sent: Wednesday, September 28, 2005 10:30 PM
> To: DTXpress@yahoogroups.com
> Subject: Spam:[DTXpress] Adding on..
> 
> 
> Sorry guys if this has been covered a million times but I had a 
> question about adding other pads to my DTXPRESS III. I guess my 
main 
> objective is to have other pads to use mainly for cymbals. Looking 
at 
> the rear panel I do not see any extra inputs so I believe I need 
to 
> purchase some sort of uhh something! Where can I get something 
like 
> this? Thanks everyone!
> 
> 
> 
> 
> 
> 
> 
> 
_____________________________________________________________________
_
> The information transmitted herewith is sensitive information 
intended
> only for use to the individual or entity to which it is addressed. 
If
> the reader of this message is not the intended recipient, you are 
hereby notified that any review, retransmission, dissemination, 
distribution, copying or other use of, or taking of any action in 
reliance upon, this information is strictly prohibited. If you have 
received this communication in error, please contact the sender and 
delete the material from your computer.
> 
_____________________________________________________________________
_
> This email has been scanned by the MessageLabs Email Security 
System.
> For more information please visit http://www.messagelabs.com/email 
> 
_____________________________________________________________________
_