--- In DTXpress@yahoogroups.com, Fernando Vargas <fer2itm@...> wrote: > > Thanks everyone!! specially Keith! > > The problems is the hardware, the pedal is not working well, I give it to a qualified yamaha service and the diagnostic is the rubbers inside of pedal are damaged, so is a hardware problem. > Ahh, I didn't realise it was an old pedal. I have seen a similar thing before, although not with the rubbers. There is a PCB in the pedal with a plastic film above it with conductive areas on it. This is separated from the PCB with a spacer. The rubber pushes the film onto the PCB. Someone had a pedal which wasn't working and the plastic film was permanently deformed so it always touched the PCB. I pealed off the plastic film & put it back again and that fixed it. I am not sure how long it would have lasted, but it would have been useful as a spare pedal. I'm glad you have found the problem. I assume Yamaha can just replace the broken part? Keith.
Message
Re: Problem with FootCL
2009-05-21 by Keith
Attachments
- No local attachments were found for this message.