Yamaha DTXpress/DTXplorer/DTXtreme

On the DTXpress II, inputs 1,2,3,4,5,6,7,8 can all take "two zone input
pads". Inputs 2,6 and 7 could take the "three zone input pads", like the
TP-65S, TP series pads on the Dtxtreme IIS kit and the PCY-65S, PCY-130S
three zone cymbal pads (bell/bow/edge) etc. 

 

The only quark about the DTXpress II module was that from the factory
the ROM chips were miss programmed, so that the inputs other than 2, 6,7
could not be choked when used with the cymbal pads. You could choke all
inputs on the Dtxpress 1 and it was corrected on the later modules.A new
ROM chip had to be burned to corrected it on the Dtxpress module though.


 

Inputs 9/10 are expecting two piezos for which Yamaha only made a one
pad I am aware of the used it directly the BP-80 Barpad. You could plug
the KP-65 kick pad into inputs 9/10 and then plug another single zone
pad into the KP-65 or you could use a Y-splitter cable (insert cable)
and plug two single zone pads into inputs 9/10.

 

OldGuyDrummer-OGD

 

Rob 

 

From: DTXpress@yahoogroups.com [mailto:DTXpress@yahoogroups.com] On
Behalf Of bigbearstyx
Sent: Wednesday, June 09, 2010 10:31 PM
To: DTXpress@yahoogroups.com
Subject: [DTXpress] Find another dual zone imput

 

  

my DTXII manual sez my multi zone imputs are 2 Sn / 6 Ride / 7 cr.
I have my 3 zone snare pad in zone 6 for ride and china/crash.(never got
much use out of it as a snare) I have 2 other dual zone cymbals.
One works fine in 7 crash. And my other cymbal is using 9 off the 9/10
imput. Keith( I mean guys) lol- is there anyway to use another imput (or
use imput 2 (snare))) to allow me to use that other dual zoned cymbal.
?????
thxs 
bbs 




______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email 
______________________________________________________________________


______________________________________________________________________
The information transmitted herewith is sensitive information intended
only for use to the individual or entity to which it is addressed. If
the reader of this message is not the intended recipient, you are hereby notified that any review, retransmission, dissemination, distribution, copying or other use of, or taking of any action in reliance upon, this information is strictly prohibited. If you have received this communication in error, please contact the sender and delete the material from your computer.
______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email 
______________________________________________________________________