Yamaha DTXpress/DTXplorer/DTXtreme

Scott,

There is an option on the module to reroute pad 1 to pad 9/10, so where you
would normally use pad 1 for kick, you now have to use pad 9 for kick. If you
look back at the original thread I think I might have given the solution, but
just in case ....

I changed the setting on the module to swap pad 1 and pad 9/10 (you'll find
this under the TRIG section, I think??).
I then plugged the mono kick cable into input 9/10, and the stereo TP80S cable
into input 1.
Then I set up the triggers and voices for input 1 according to my TP80S ....

And that's it.

Since input 1 is stereo (pad 1 + rim 1), you can use your PCY60S in the same
way I set up the TP80S.

If you have any problems setting this up, drop me an email and I'll check the
exact procedure on my system and relate whatever I did, and where you need to
find the settings.

Ian